User Manual

Plastic housing,

desktop model

Cover: Rear:

6340Z02

4 5

6340Z03

1 Operation mode display

2 LCD panel

(2 lines of 16 characters each)

3 Lighted card slot for read/write

access for chipcards

4 TCP/IP interface *

5 Power supply socket

6 Connecter (D-Sub 9)

* Prepared; not available with HSW3.1

Engineering notes

The HCW3.2 is a vital Hotel Solution system component. The number of HCW3.2 chip-

card encoders must be proportionate to the size of the hotel with an adequate quantity

included when planning the system. Two HCW3.2 chipcard encoders are required at an

absolute minimum, so that if one fails, card keys can still be programmed using the

second card encoder.

The chipcard encoder should be located close to the front-office system (FOS) or the

HOTEL SOLUTION operator station.

A null modem is required if a long distance between the HCW32 chipcard encoder and

the PC with the HOTEL SOLUTION database is unavoidable.

Mounting

• The card encoder must be used in dry, enclosed spaces only

• Keep horizontal and on a firm base

• To be commissioned by trained personnel only

• Do not open the unit

• Local safety and installation regulations apply

3/6

Building Technologies Chipcard encoder CM2N6340en

01.09.2008