User Manual

ManualsBrandsSiemens ManualsOperator unitsChipcard encoder HCW3.2

340

HOTEL SOLUTION™

Chipcard encoder

HCW3.2

Chipcard encoder/reader with LCD panel

• Programming of access code on chipcard

• Reading of access code from chipcard

• HOTEL SOLUTION database control

• Text instructions on 2-line LCD panel for user guidance

Application

The HCW3.2 chipcard encoder is used in conjunction with the HOTEL SOLUTION

software and the HOTEL SOLUTION database, to program the chipcards (hotel room

keys) at the hotel reception. The HCW3.2 chipcard encoder is a desktop unit operated

with the HOTEL SOLUTION software via a serial interface (TCP/IP prepared).

It can also read pre-programmed chipcards and assign cards to rooms and guests.

CM2N6340en

01.09.2008

Building Technologies

Summary of content (6 pages)

PAGE 1
s 6 340 HOTEL SOLUTION™ HCW3.2 Chipcard encoder Chipcard encoder/reader with LCD panel • Programming of access code on chipcard • Reading of access code from chipcard • HOTEL SOLUTION database control • Text instructions on 2-line LCD panel for user guidance Application The HCW3.2 chipcard encoder is used in conjunction with the HOTEL SOLUTION software and the HOTEL SOLUTION database, to program the chipcards (hotel room keys) at the hotel reception. The HCW3.
PAGE 2
Functions The HCW3.2 chipcard encoder reads and writes ISO 7816 compatible chipcards with a security store chip by type SLE4442/SLE5542. Furthermore, a defined Siemens security code is required to use the chipcards. Other cards are not accepted and are deactivated after three attempts. Insert the card into the lit slot to write. Chipcards can be created for the room of a specific guest, or for access to a group of rooms for hotel staff.
PAGE 3
Cover: 1 Rear: 2 4 3 5 6340Z03 Plastic housing, desktop model 6 1 2 3 4 5 6 Operation mode display LCD panel (2 lines of 16 characters each) Lighted card slot for read/write access for chipcards TCP/IP interface * Power supply socket Connecter (D-Sub 9) 6340Z02 s * Prepared; not available with HSW3.1 Engineering notes The HCW3.2 is a vital Hotel Solution system component. The number of HCW3.
PAGE 4
Technical data HCW3.
PAGE 5
Serial interface cable Interface Coupling and connector Cable length serial, RS232 D-Sub 9 2.00 m Connection diagrams Interface cable connection diagram 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 2 3 5 BUS RS 232 RXD BUS RS 232 TXD GND Dimensions 56 6340M01 Dimensions in mm 57.5 105 54 1 150,5 175 24,5 2,5 s 5/6 Building Technologies Chipcard encoder CM2N6340en 01.09.
PAGE 6
/6 © 2006-2008 2008 Siemens Switzerland Ltd Building Technologies Chipcard encoder Subject to change CM2N6340en 01.09.