User Manual

Building Technologies
Building Technologies CM2E6340en 30-Nov-06 Page 2 of 2
Materials
total weight of device
310 g
Plastics ASA Housing
130 g
PMMA Front plate
35 g
Circuit boards with
components
(148.5x99x20mm) FR4, solder containing
lead
145 g
Special Components
Fiberglass-reinforced thermoplastic
Card holder (on circuit
board)
(10 g)
Xport Device-Server (on
circuit board)
(10 g)
LC display (on circuit board) (45 g)
(Parts with weights in brackets are already included in components declared under materials.)
Disposal
For disposal purposes, this product is defined as waste derived from electrical
and electronic equipment (“electronic waste”) and must not be disposed of as
household waste. This applies particularly to the PCB assembly.
In some cases, special handling of specific components may be required by law,
or be advisable for environmental reasons.
Current local legislation must be observed.
Legal disclaimer: This declaration is for information purposes only
This environmental product declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that
the product will retain a particular composition for a particular period.
Siemens Switzerland Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this
information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.