User Manual

(2)
X13
(1)
PC
HRC3.1
To upload applications and parameter data to
HRC3.1 and Saphir, the PC is connected to
the HSC Tool via
− RS232–RJ45 adapter (1) and
− RJ45 patch cable 1:1 (2)
with pin connector X13 on the HRC3.1.
Use with HRC3.1
(2)
J1
(1)
PC
(3)
HRC3.2
To upload applications and parameter data to
HRC3.2 and ACC88, the PC is connected to
the HSC Tool via
− RS232–RJ45 adapter (1)
− RJ45 patch cable 1:1 (2) and
− J1 service adapter (3)
with pin connector J1 on the HRC3.2.
Use with HRC3.2
Ordering
When ordering, please specify the quantity, product name, and type designation.
2 Adapter and cable sets HCS3.2
Example
Equipment combinations
Name Type Data sheet no.
Room controller
HRC3.1 N6313
Room controller
HRC3.2 N6314
Mechanical design
The adapter and cable set HCS3.2 consist of:
Components
• 1 RS232–RJ45 adapter (1)
• 1 RJ45 patch cable 1:1 (2)
• J1 service adapter (3)
2 / 4
Siemens Adapter and cable set CM2N6355en
Building Technologies 31.07.2008