User Manual

ManualsBrandsSiemens ManualsRoom controlsAdapter and cable set HCS3.2

355

HOTEL SOLUTION™

Adapter and cable set

HCS3.2

To connect a service PC to a room controller

HCS3.2 is an adapter and cable set to load applications and parameter data

from one service PC to a room controller HRC3.1 or HRC3.2.

Use

The adapter and cable set is required to commission and service Hotel Solution.

Functions

The adapter and cable set requires a service PC to connect to a room controller

HRC3.1 or HRC3.2.

You can load application and parameter data from the HSC tool to the room

controller and vice versa.

CM2N6355en

31.07.2008

Building Technologies

Summary of content (4 pages)

PAGE 1
s 6 355 HOTEL SOLUTION™ Adapter and cable set HCS3.2 To connect a service PC to a room controller HCS3.2 is an adapter and cable set to load applications and parameter data from one service PC to a room controller HRC3.1 or HRC3.2. Use The adapter and cable set is required to commission and service Hotel Solution. Functions The adapter and cable set requires a service PC to connect to a room controller HRC3.1 or HRC3.2.
PAGE 2
Use with HRC3.1 PC (1) To upload applications and parameter data to HRC3.1 and Saphir, the PC is connected to the HSC Tool via − RS232–RJ45 adapter (1) and − RJ45 patch cable 1:1 (2) with pin connector X13 on the HRC3.1. (2) HRC3.1 X13 Use with HRC3.2 PC (1) To upload applications and parameter data to HRC3.2 and ACC88, the PC is connected to the HSC Tool via − RS232–RJ45 adapter (1) − RJ45 patch cable 1:1 (2) and − J1 service adapter (3) with pin connector J1 on the HRC3.2. (2) (3) HRC3.
PAGE 3
J1 service adapter for HRC3.2 The J1 service adapter has a button. The key is used to load an operating system (OS = Operating System) to the room controller HRC3.2. Proceed as follows to load an operating system (turn on the PC and turn off the room controller): − Press the button − Turn on the room controller while pressing the button − The service LED on the HRC3.2 is lit continuously in orange 3/4 Siemens Building Technologies Adapter and cable set CM2N6355en 31.07.
PAGE 4
Technical data RS232–RJ45 adapter PC connector Patch cable connector RS232 RJ45 RJ45 patch cable Connector Wiring Number of strands on patch cable RJ45 1:1 8 J1 service adapter Patch cable connector J1 service connector room controller Number of strands on ribbon cable RJ45 8-pin connector 8 Connection diagrams Room controller connections HRC3.1: Plug X13 The HRC3.1 has RS232 interface (8-pin RS232, RJ45) on plug X13 for general servicing and diagnostics.