User Manual

Function
The HCH3.2 chipcard holder communicates with the HRC3.1/HRC3.2 room controller
via a serial port, performing the following functions:
• Reads the access code on a chipcard
• After reading it, transmits the access code to HRC3.1/HRC3.2 room controller
• Activates the functions programmed in the HRC3.1/HRC3.2 room controller based
on the access code concerned (guest code, hotel staff code, invalid code).
• Transmits the membrane switch signal for the selected message option
• Displays signals from the HRC3.1/HRC3.2 room controller with illuminated LEDs
above the imprinted symbols
• Control of the illumination of the slot via the HRC3.1/HRC3.2 room controller
• Hotel-room doorbell feature via inbuilt loudspeaker (8 ohms, 2 W) for 3-tone chimes
• Volume adjustable by potentiometer (card holder must be dismounted for access)
• Kind of chime can be set (tone 1 / tone 2 / tone 3) with an application parameter in
the room controller
Types
HCH3.2/BB Chipcard holder for Bticino Living cover plate range
HCH3.2/BW Chipcard holder for Bticino Light cover plate range
HCH3.2/VB Chipcard holder for Vimar Idea cover plate range
HCH3.2/VW Chipcard holder for Vimar Plana or Ikon cover plate range
Ordering
When ordering, please specify the quantity, product name and type code:
30 Chipcard holders HCH3.2/BB
Example
The following items depend on the desired overall program and installation type and
must be ordered separately from the corresponding frame supplier:
• Flush-mounted or cavity wall box for integration.
• Cover frame of the corresponding supplier with desired surface.
Compatibility
Device Type Data sheet
Room controller
HRC3.1
N6313
Room controller
HRC3.2
N6314
Chipcard holder on same room bus
HCH3.2/..
N6333
Chipcard reader on same room bus
HCR3.2/..
N6332
Chipcard encoder
HCW3.2
N6340
Room unit on same room bus
HTC3.2/..
N6320
2/8
Building Technologies HCH3.2/.. - Chipcard holder with doorbell speaker CM2N6333en
01.09.2008