Operation Manual

35
Changing the timer duration
Use the
@ or A button to change the timer duration. After a few
seconds, the change is adopted.
Cancelling the timer duration
Use the
A button to reset the timer duration to 0:00. The
change will be adopted after a few seconds. The timer is
switched off.
Checking the time settings
If several time-setting options are set, the corresponding
symbols are illuminated on the display. The timer counts down
in the foreground. The
S symbol is preceded by the N arrow
and the timer can be seen counting down.
To check the
S timer, x cooking time or 0 clock, press the
0 button repeatedly until the arrow points to the appropriate
symbol. The value is shown for a few seconds on the display.
Setting the cooking time
The cooking time for your meal can be set on the oven. When
the cooking time has elapsed, the oven switches itself off
automatically. This means that you do not have to interrupt
other work to switch off the oven. The cooking time cannot be
accidentally exceeded.
Example in the diagram: Cooking time 45 minutes.
1. Use the function selector to set the type of heating.
2. Use the temperature selector to set the temperature or grill
setting.
3. Press the 0 button twice.
20:00 is shown in the display. The time symbols light up and
the arrow
N is next to x.
4. Use the @ or A button to set the cooking time.
5. Press the † button.
The oven starts. The cooking time counts down in the display
and the
Nx symbol lights up. The other time symbols go out.
The cooking time has elapsed
An audible signal sounds. The oven stops heating. 0:00 is
shown in the display. Press the
0 button. The audible signal
stops. Turn the function selector to the off position. The oven is
switched off.
Cancelling the cooking time
Use the
A button to reset the cooking time to 0:00. After a few
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
0 button
beforehand.
Checking the time settings
If several time-setting options are set, the corresponding
symbols are illuminated on the display. The
N arrow is next to
the symbol for time function which is currently visible on the
display.
To check the
V timer, x cooking time or 0 clock, press the
0 button repeatedly until the N arrow points to the appropriate
symbol. The display shows the value for a few seconds.
Setting the clock
When the appliance has been connected to the power supply,
or after a power cut, the
N0 symbols and three zeros light up
in the display. Set the clock.
1. Press the @ or A button.
Default value
@: 12:00
Default value
A 23:59
2. Use the @ or A button to set the clock.
3. Press the 0 button. The time is set.
Changing the clock
Prerequisite: your appliance must be switched off.
1. Press the 0 button twice.
The time symbols light up in the display, the
N arrow is next
to the
0 symbol.
2. Use the @ or A button to change the clock.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Childproof lock
The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been switched on.
Switching on the childproof lock
Requirement: No cooking time should be set and the function
selector is in the off position.
Press and hold the h button for approx. four seconds.
The
@ symbol appears in the display. The childproof lock is
activated.
Switching off the childproof lock
Press and hold the h button for approx. four seconds.
The
@ symbol on the display goes out. The childproof lock is
deactivated.