Operation Manual

32
Ovenware test
Do not switch on the microwave unless there is food inside. The
following ovenware test is the only exception to this rule.
Perform the following test if you are unsure whether your
ovenware is suitable for use in the microwave:
1. Heat the empty ovenware at maximum power for ½ to
1 minute.
2. Check the temperature occasionally during that time.
The ovenware should still be cold or warm to the touch.
The ovenware is unsuitable if it becomes hot or sparks are
generated.
Microwave power settings
Use the button to set the desired microwave power.
Notes
■ When you press a button, the selected power lights up.
■ The microwave power can be set to 900 watts for a
maximum of 30 minutes. With all other power settings a
maximum cooking time of 1 hour 30 minutes is possible.
Setting the microwave
Example: Microwave power setting 360 W, cooking time
17 minutes
1. Set the function selector to ß.
2. Press the button for the microwave power setting you require.
The button lights up and a suggested cooking time is
displayed.
3. Use the @ or A button to set the cooking time.
4. Press the † button.
Operation begins. The cooking time starts counting down in the
display.
The cooking time has elapsed
A signal sounds. Microwave operation has finished. Turn the
function selector to the zero position. You can stop the audible
signal by pressing the
0 button.
Opening the oven door during operation
Operation is suspended. After closing the door, press the
† button. Operation continues.
Changing the cooking time
This can be done at any time. Use the
@ or A button to change
the cooking time.
Changing the microwave power setting
Press the button for the new microwave power setting. Use
the
@ or A button to set the cooking time and restart the
microwave.
Cancelling operation
Press and hold the
† button for approximately 4 seconds and
turn the function selector to the zero position.
Notes
■ When you set the function selector to ß, the highest
microwave power setting always lights up as the proposed
setting.
■ If you open the appliance door during cooking, the fan may
continue to run.
MicroCombi operation
This involves simultaneous operation of the grill and the
microwave. Using the microwave makes your dishes ready
more quickly, but they are still nicely browned.
You can switch on all microwave power settings.
Exception: 900 watts
Setting Microwave Combi operation
Example: microwave 360 W, 17 minutes and hot air 3 190 °C.
1. Set the type of heating using the function selector, and the
temperature using the temperature selector.
2. Press the button for the microwave power setting you require.
A suggested cooking time appears.
3. Use the @ or A button to set the cooking time.
4. Press the † button.
Appliance operation begins. The cooking time starts counting
down.
The cooking time has elapsed
A signal sounds. Combination mode has finished. You can stop
the audible signal by pressing the
0 button.
Opening the oven door during cooking
Operation is suspended. After closing the door, press the
†
button briefly. The programme will then continue.
Pausing operation
Press the
† button briefly. The oven is paused. Press the†
button again to continue operation.
Changing the cooking time
This can be done at any time. Use the
@ or A button to change
the cooking time.
Changing the microwave power setting
Press the button for the new microwave power setting. Use
the
@ or A button to set the cooking time and restart the
microwave.
Cancelling operation
Press and hold the
† button for approximately 4 seconds, turn
the function selector and temperature selector back to the zero
position.
90 W for defrosting delicate foods
180 W for defrosting and continued cooking
360 W for cooking meat and heating delicate foods
600 W for heating and cooking food
900 watts for heating liquids