Environmental Declaration

EPD - Type II
Based on ISO 14021
TPV; halogen-free Lock Cover 2 variant
TPS SEBS; halogen-free Bearing Ring, sealings variant
Sintered steel Pinion 3g
Steel; galvanized Torque Blade 55g
Steel Various metal parts 11g
Steel; zinc plated Various metal parts 52g
Steel; phosphatized Various Coupling parts 23g
Steel, Copper, PCBA Motor 30g
PVC / Copper PVC Cable switch variant
PVC / Copper PVC Cable output variant
PVC / Copper PVC Cable power variant
PVC / Copper PVC Cable motor 2g
Grease with PTFE Grease Kluebersynth LI44-22 1g
Grease Grease Kluebersynth BLR 46-122 1g
FR4; TBBA; solder SnAgCu PCBA variant
*Variant parts list
[g]
Total weight of device
Various parts and gears
CW/CCW Knob
Housings
Spacer Support
Metals
Others
PCBAs (Printed Circuit Board
assembled)
150
GSD346.1x
582
19
0
4
151150
4
GSD146.1x
574
19
0
151
GSD361.1A
518
15
135150
4
GSD161.1x
464
15
151
GSD341.1x
460
15
0
15
0
GSD166.1x
587
19
GSD141.1x
452
Lock Cover 2
Bearing Ring, sealings
PVC Cable switch
PVC Cable output
PVC Cable power
PCBA
Fire load [MJ]
Typical energy consumption
[kWh/a]
Comments
Regulation (EC) No. 1907/2006 (REACH)
The device should not be disposed of as unsorted municipal waste. The special treatment for specific components may
be mandated by law or ecologically sensible.
Observe all local and applicable laws.
Disposal
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive.
To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the
candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w.
(Status according to the creation date of this document.)
11
4
68
114
3
8
34
4
68
34
2
11
2
23
71
114
3
71
2
98
2
23
4
0
3
60
38
78
11
3
77
114
29
8
29
0
3
3
0
2
77
Page 2/3