Installation Instructions

Document No. A5W00070317
Installation Instructions
November 9, 2020
Page 2 of 5 Siemens Industry, Inc.
Figure 3. Shaft Length and Proper Shaft
Adapter Location.
Figure 4. Fasten the Shaft Adapter to
the Damper Shaft.
Figure 5.
1. Insert the eyelet through housing ear.
2. Insert screw through eyelet and tighten using
1/4-inch (6.4 mm) hex driver.
Figure 6. Tighten Conduit Screws
(No. 2 Phillips Screwdriver).
CAUTION:
Apply 35 in-lb to 53 in-lb
(4 Nm to 6 Nm) maximum
torque to the shaft fixation
set screws.
All four screws must be
tightened.