Environmental Declaration

EPD - Type II
Based on ISO 14021
GPC131.1x Damper Actuator; 4Nm
GPC136.1x Damper Actuator; 4Nm
GPC161.1x Damper Actuator; 4Nm
GPC166.1x Damper Actuator; 4Nm
GPC361.1A Damper Actuator; 4Nm
GPC121.1x Damper Actuator; 4Nm
GPC126.1x Damper Actuator; 4Nm
GPC321.1x Damper Actuator; 4Nm
GPC326.1x Damper Actuator; 4Nm
Product line
Siemens Schweiz AG
Building Technologies Division
Gubelstrasse 22
CH-6300 Zug
Damper Actuator GAP Tiny MK3 / OpenAirTM
Environmental
Product Declaration
Type of equipment /
Product No.
Product
Process control
Management System since by
ISO 14001 (Environment) 20.10.1998 SQS
ISO 9001 (Quality) 22.07.1986 SQS
Typical energy consumption variant *) see below
Maintenance
Fire protection according to
Fire load variant *) see below
20-PAP Corrugated fiber board Cardboard 105g
22-PAP paper Label 1g
22-PAP paper Installation Instruction 16g
Notes on disposal
Total weight of device variant *) see below
The total wei
g
ht of a device ma
y
deviate from the total of the wei
g
hts of all individual com
p
onents due to roundin
g
.
POM; halogen-free Various parts and gears variant
POM; halogen-free Gear Fixation Axle variant
POM TD5; halogen-free Bearing Ring; Gear Fixation Wedge variant
PA66 AF20; AF 20%; halogen-free Gear Wheel 2 SR 2g
One-way, recyclable
Not necessary
None
EN 60730 & UL 60730
Environmentally compatible
product design
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
the environmental impact of its products with respect to production, procurement, sales, use, services and disposal
during the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".
Product use
Plastics
Risk of fire
Materials
Packaging
Page 1/3