Data Sheet for Product

ManualsBrandsSiemens ManualsDamper actuatorsRCM Suplier's Declaration GNP…

CE1N4609en

2021-12-03

Smart Infrastructure

609

OpenAir

Fast running actuators for

air dampers

GNP19..

Fast runner rotary version with electronic fail-safe function, AC/DC 24 V

Electronic rotary actuator for 2-position, 3-position, or modulating control,

nominal torque 6 Nm, at 2 s running time, with electronic fail-safe function; self-

centering shaft adapter, range mechanically adjustable between 0...90°, prewired

with 0.9 m long standard connection cables.

GNP196.1E with adjustable auxiliary switches for auxiliary functions.

Use

 For damper areas up to 1 m

, friction dependent.

 For laboratory fume hoods, etc.

 For air technology applications within the building technology.

 Suitable for use with continuous, 2-position, or 3-position controllers.

Summary of content (6 pages)

PAGE 1
4 609 OpenAirTM Fast running actuators for air dampers GNP19.. Fast runner rotary version with electronic fail-safe function, AC/DC 24 V Electronic rotary actuator for 2-position, 3-position, or modulating control, nominal torque 6 Nm, at 2 s running time, with electronic fail-safe function; selfcentering shaft adapter, range mechanically adjustable between 0...90°, prewired with 0.9 m long standard connection cables. GNP196.1E with adjustable auxiliary switches for auxiliary functions.
PAGE 2
Type summary Types Power GNP191.1E Auxiliary switch Damper size Runtime 6 Nm Ca. 1 m2 2s No AC/DC 24 V GNP196.1E Torque Yes Note When installing and operating rotary actuators types GNP.. in low-noise environments, check the acoustic response of the actuators operated together with the measuring and control equipment.
PAGE 3
Functions DIL switch setting Siemens default setting A DIL switch is used to set the actuator's functionality. Modulating control 2-position control 3-position control Position indication: Mechanical Rotary angle position. Position indication: Electric. Output voltage U = DC 0...10 V is generated proportional to rotary angle. U depends on the DIL switch's rotary direction position. Rotary angle limitation The rotary angle of the shaft adapter can be limited mechanically to 5° increments. GNP196.
PAGE 4
Technical data 24 VAC/VDC supply (SELV/PELV) Functional data Positioning signal Y/Y1 Positioning signal Y2 Position indicator Auxiliary switch for GNP196.1E Connection cable Housing type Protection class Environmental conditions Standards, guidelines Dimensions Weight Operating voltage / Frequency Power consumption: Actuator running Hold Nominal torque Maximum torque (when blocked) Nominal rotary angle / max.
PAGE 5
Disposal The device is considered an electronics device for disposal in terms of European Directive 2012/19/EU and may not be disposed of as domestic garbage.  Dispose of the device through channels provided for this purpose.  Comply with all local and currently applicable laws and regulations. Internal diagrams 2-position control AC/DC 0 V AC/DC 24 V 7 S1 S4 (Q11) (G) 1 AC 24 V...230 V / 6 (2) A DC 12...
PAGE 6
Dimensions ø 10.5 ø5 Dimensions in mm Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a 6300 Zug Switzerland Tel. +41 58-724 24 24 www.siemens.com/buildingtechnologies © Siemens Switzerland Ltd, 2010 Technical specifications and availability subject to change without notice. 6/6 Siemens Smart Infrastructure Air damper actuators for lab applications GNP19..