Manualshelf

Installation Instructions

ManualsBrandsSiemens ManualsDamper actuatorsOpenAir GND Series Electronic Damper Actuator UL Listed for Fire / Smoke and Smoke Control Dampers, 2-Position, 15-Second Runtime, 15-Second Spring Return Time Technical Instructions
123
Table Of Contents
Document No. 129-403
Installation Instructions
October 2, 2009
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. OpenAir is a registered trademark of Siemens Industry, Inc. Product or company names mentioned herein may be
the trademarks of their respective owners. © 2009 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
+ 1 847-215-1000
Your feedback is important to us. If you have comments
about this document, please send them to
sbt_technical.editor.us.sbt@siemens.com
Document No. 129-403
Printed in the USA
Page 3 of 3
External Mount
For an external mount make a ∅ 1-1/4-inch (32 mm)
hole in the duct wall or damper sleeve. The sensor will
protrude into the duct or damper for proper temperature
sensing.
Figure 5. Providing Proper Sensor Temperature
Detection Access.
Dimensions
Figure 6. Dimensions in Inches (mm).