Data Sheet for Product

6
Siemens
A6V11465149_en
--
_a
Smart Infrastructure 2019-04-15
Mounting bracket / pin
If the actuator is mounted directly on the damper shaft, the mounting bracket/pin must be
used. The insertion depth for the shaft into the housing must be sufficient.
Temperature monitoring unit
The temperature monitoring unit is to be fitted to the duct wall or the damper housing using 2
self-tapping screws of 3.5 mm diameter.
The enclosed drilling template facilitates mounting. When mounting, it must be ensured that
the thermal fuse is fully exposed to the airflow.
Maintenance
Caution
The actuator is maintenance free.
● Do not open the actuator.
●
Maintenance wo
rk may only be carried out by the manufacturer.
Disposal
WARNING
Tensioned return spring
Opening the actuator housing can release the highly tensioned return spring, which can
cause flying parts and injuries.
●
Do not open the actuator housi
ng.
The device is considered an electronic device for disposal in accordance with the European
Guidelines and may not be disposed of as domestic garbage.
● Dispose of the device through channels provided for this purpose.
● Comply with all local and currently applicable laws and regulations.