Environmental Declaration

EPD - Type II
Based on ISO 14021
GDBxxx.9x/xx Ball Valve Actuator; 5Nm
GLBxxx.9x/xx Ball Valve Actuator; 10Nm
GLDxxx.9x/xx Ball Valve Actuator; 8Nm
GLA161.9E/HR Ball Valve Actuator ; 10Nm
Product line
Siemens Schweiz AG
Building Technologies Division
Theilerstrasse 1a
CH-6300 Zug
Management System since by
ISO 14001 (Environment) 20.10.1998 SQS
ISO 9001 (Quality) 22.07.1986 SQS
Typical energy consumption variant *) see below
Maintenance
Fire protection according to
Fire load variant *) see below
20-PAP Corrugated fiber board Cardboard & Paper variant
22-PAP paper Label 1g
22-PAP paper Installation Instruction 16g
Notes on disposal
Packaging
Environmentally compatible
product design
Process control
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
the environmental impact of its products with respect to production, procurement, sales, use, services and disposal
during the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".
Product use
Risk of fire
Energy consumption is between 0.6 and 7 kWh/a (depending
mainly on running time of the actuator)
Product
Ball Valve Actuator Baby GAP MK3
One-way, recyclable
Environmental
Product Declaration
Type of equipment /
Product No.
Not necessary
None
EN 60730 & UL 60730
Page 1/3