Data Sheet for Product

7 / 14
A6V10636203_en--_f Siemens
2021-11-08 Smart Infrastructure
Engineering
If condensation occurs at the mounting site, the use of the temperature adapter ALJ100 is
recommended in order to protect the actuator. If the medium temperature is ≤ 0 °C, the
adapter shaft must be greased with silicon grease.
T
M
Medium temperature
T
A
Ambient temperature
Range of use for actuator/valve
Use with ALJ100
GLB161.9E/MO
The Modbus converter is designed for analog control at 0...10 V.
Commissioning
When commissioning the system, check wiring and the functions of the rotary actuator.
Manual adjustment
The rotary actuator can be manually adjusted into any position between 0° and 90° by
pushing the gear train disengagement slider.
If a control signal from the controller is present, this will take priority in determining the
position after the slider is released.
For manual adjustment: Power off!
Maintenance
The actuators GLB..9E.. are maintenance-free.
Disposal
The device is considered electrical and electronic equipment for dis-
posal in terms of the applicable European Directive and may not be
disposed of as domestic garbage.
 Dispose of the device through channels provided for this pur-
pose.
 Comply with all local and currently applicable laws and regu-
lations.