Basic Documentation

4/46
Siemens VAV compact controller KNX/PL-Link G..B181.1E/KN CE1P3547en
Smart Infrastructure 2021-10-25
1 Introduction
1.1 Revision history
1.2 Before you start
1.2.1 Trademarks
Trademarks used in this document are listed together with their legal owners below.
Use of these trademarks is subject to international and national statutory provisions.
Trademarks
Legal owner
KNX®
KNX Association, B - 1831 Brussels-Diegem Belgium
http://www.knx.org/
All the product names listed are trademarks (™) or registered trademarks (®) of
their respective owners, as listed in the table. Further to the notes in this section,
and to facilitate the reading of the text, these trademarks will not be indicated
elsewhere in the text (e.g. by use of symbols such as ® or ™).
1.2.2 Copyright
This document may be duplicated and distributed only with the express permission
of Siemens and may be passed only to authorized persons or companies with the
required technical knowledge.
1.2.3 Quality assurance
These documents were prepared with great care.
• The contents of all documents are checked at regular intervals.
• Any corrections necessary are included in subsequent versions.
• Documents are automatically amended as a consequence of modifications and
corrections to the products described.
Please make sure that you are aware of the latest document revision date.
Version
Date
Changes
Section
Pages
2.5
25.10.2021
Update for Series H
Removal of outdated parts
2.0
23.03.2017
Update for Series G
1.0
26.02.2016
EU and RCM Conformity,
European Directive
2012/19/EU
8 Technical data,
10 Environmental compatibility and
disposal
38
42