Data Sheet for Product

5 / 10
A6V10636203_enAP_d Siemens
2018-01-25 Building Technologies
Notes
Safety
Caution
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
● Observe national provisions and comply with the appropriate safety regulations.
● Use only properly trained technicians for mounting, commissioning, and servicing.
Mounting
Both ball valve and rotary actuator can easily be assembled at the mounting location. Neither
special tools nor adjustments are required.
Orientation
90?
4716Z 16
90?
Installation
WARNING
No internal line protection for supply lines to external consumers
Risk of fire and injury due to short-circuits
● Adapt the line diameters as per local regulations to the rated value of the installed fuse.
Commissioning
When commissioning the system, check wiring and the functions of the rotary actuator.
Manual adjustment
The rotary actuator can be manually adjusted into any position between 0° and 90° by
pushing the gear train disengagement slider.
If a control signal from the controller is present, this will take priority in determining the
position after the slider is released.
For manual adjustment: Power off!
Maintenance
The actuators GLB..9E are maintenance-free.