Specifications

97
Appendix
Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / appendix.fm / 06.10.2008
Schablone 2005_07_27
You cannot conduct VoIP tel-
ephone calls.
ì The phone or the Gigaset SX761 dsl is not con-
nected properly to the DSL port. Check the cabling
and the ports.
ì The access data for your VoIP phones is not entered
correctly. Check the access data.
ì You have not assigned the VoIP phone numbers to
the telephone port. Check the configuration of the
telephone ports and the extensions.
ì Your VoIP configuration is not set up with the cor-
rect Codecs. Contact your VoIP provider and assign
the correct Codecs (see page 64).
Password forgotten or lost. ì Reset the Gigaset SX761 dsl (page 16).
Warning: Please bear in mind that this will return all
the configuration settings to the factory settings.
You cannot access a
resource (drive or printer)
on a different PC.
ì Make sure that TCP/IP has been installed and con-
figured on all the PCs in the local network and that
the PCs all belong to the same workgroup.
ì Check whether the resource has been released on
the PC in question and whether you have the nec-
essary access rights.
ì Printing: Check whether the printer has been set up
as a network printer.
Operating information:
u LAN ports
The LAN ports may only be used for in-house networks. The ports are destroyed
externally if there is a power surge.
u Telephone ports
The phone ports are only suitable for connecting in-house phones/phone systems.
The ports are destroyed externally if there is a power surge.
Symptom Possible cause and solutions