Specifications

92
Status information
Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / admin_router.fm / 06.10.2008
Schablone 2005_07_27
The maximum possible data transfer rate of your DSL port for incoming and out-
going data traffic.
– Noise margin
The maximum signal-to-noise ratio of your DSL port for incoming and outgoing
data traffic.
– Line attenuation
The line attenuation of your DSL port for incoming and outgoing data traffic.
– Output power
The output power of your DSL port for incoming and outgoing data traffic.
u Address Translation (NAT)
Shows the status of the NAT (Network Address Translation) for the Internet connec-
tion.
u Dynamic DNS
Shows the status of the configuration for dynamic DNS. If dynamic DNS is set up, the
name of the provider is shown.
ì Click Refresh to refresh this screen and update the displayed data.
Local Network
You will find information about the local network settings on the Local Network screen
in the Status menu.
In the Status menu, select Local Network:
u IP address
Shows the local IP address of the device.
u Subnet mask
Shows the subnet mask used in the local network.
u MAC address
Shows the local MAC address of the device for wired data transfer.
u DHCP Server
– Status
Shows the status of the DHCP server of the device for automatic assignment of IP
addresses to clients in the local network.
– DHCP clients
Shows all the clients in the network that have been assigned an IP address. The
Host name and the MAC address are listed to identify each client. Information
is also provided about the IP address assigned to each client and about the Lease
time for the IP address, i.e. the length of time before the current IP address
becomes invalid and the client is assigned a new address by the DHCP server.
ì Click Refresh to refresh this screen and update the displayed data.
u Registration Button
Shows the status of the Registration Button (Scan button) as enabled or disabled.