Specifications

Call guide

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / telefone.fm / 06.10.2008

Schablone 2005_07_27

Call waiting and call reject if busy

Confirmation tones

If you activate a service attribute, for example set up call forwarding, you will hear a pos-

itive confirmation tone if successful and a negative confirmation tone if unsuccessful.

*43# Allow call waiting

Use the key combination *43# to

allow call waiting when the line is

busy.

#43# Delete call waiting

Dial #43# to disable call waiting if

busy again.

*26# Reject all calls

Use the key combination *26# to

specify that all calls are to be rejected.

This is only possible if call waiting is

disabled.

#26#

Delete the reject calls

setting

Use the key combination #26# to

delete the reject all calls setting.

Notes:

u If you additionally enter *# in each case before the key combination shown in the

table, the settings will be forwarded directly to the exchange and will be activated

there.

u The phone numbers of waiting calls are not displayed even if the caller permits

this.

Positive confirmation tone: Ascending tone sequence at 6-second intervals

Negative confirmation tone: Regular sequence of short low-frequency tones