Specifications

73
Call guide
Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / telefone.fm / 06.10.2008
Schablone 2005_07_27
Conference call between three participants
R2
Accept call waiting/
toggle between two
calls
Press R2 to accept an incoming call
during a call. The connection to the
first call is put on hold.
If you terminate the first call before-
hand, your phone rings and you can
take the second call as usual.
By pressing R2 again, you can toggle
to the waiting caller.
R0 Reject call waiting
Press R0 to reject an incoming call
during a call.
The second call is rejected automati-
cally after 120 seconds have elapsed.
R1
Terminate one call
and return to the
waiting call
Press R1 to end the current call. You
then switch to the waiting call. The
second call is ended automatically
when you replace the receiver.
Key combination Effect Description
R3 Conference call
When you are making a call and a sec-
ond call is waiting (see above), press
R3 to enable a conference call
between you and the two call parties.
R2
End the conference
call and continue
calls separately
Press R2 to end the conference call.
You are then connected to the previ-
ously active call again and the previ-
ous waiting call is now in the wait
state again.
R4
End conference call
and set up the con-
nection between call
parties
If you press R4 during a conference
call, you end your call and set up a
connection between the other two
external call parties. You can then
replace the receiver. In the case of an
internal conference call, you simply
need to hang up.
End conference call
Replace the receiver to terminate all
calls.
Key combination Effect Description