Specifications

14
First steps
Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / device_761.fm / 06.10.2008
Schablone 2005_07_27
The LEDs (from left to right) have the following functions:
LED State Status
Power
On (green) The Gigaset SX761 dsl is connected to the mains.
Off The Gigaset SX761 dsl is disconnected from the mains.
ADSL
On A DSL connection is established.
Flashing The DSL line is being synchronised. The synchronisation
phases are shown as slow flashing (registering) and fast
flashing (training).
If no DSL cable is connected, the LED will flash at uniform
intervals.
Off DSL is deactivated.
Online
On Connection to the Internet has been established.
Off There is no Internet connection.
LAN1 –
LAN4
On A device is connected to the relevant LAN port.
Flashing The relevant LAN port is sending or receiving data (traffic).
Off There is no device connected.
VoIP
On At least one port is configured for VoIP and VoIP access is
registered with the provider.
Flashing A call is currently being made via the Internet.
Off There is currently no connection for Internet telephony or no
VoIP port has been configured.
Phone 1/
Phone 2
On The receiver of the phone connected to the port has been
lifted.
Flashing The phone is ringing and a call is being received or a call is
being conducted.
Off No phone is connected or the connection is idle.