Specifications

15
Basic configuration
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007
Schablone 2005_05_02
ì Click Refresh to refresh this screen and update the displayed data.
Device
You will find the most important device data on the Device screen in the Status menu.
ì In the Status menu, select Device:
ì Click Refresh to refresh this screen and update the displayed data.
Basic configuration
The Setup menu contains all the functions required for setting up your device for con-
nection to the Internet and for establishing your local network.
Basic Setup
The Basic Setup page shows the current Internet configuration of your device. In order
to grant access to the Internet to users in your local network, the Internet connection on
your device must be set up correctly. This is performed when you execute the start-up
CD and you do not need to change any parameter on this page.
The device’s configuration user interface allows you to configure additional Internet
connections if necessary. However, all the settings you make here must coincide with
the features your Internet service provider Tiscali makes available to you. False informa-
RTS Threshold RTS (Ready to send) Threshold defines the latency between
the message "Ready to send" and the sending of the next data
packet.
Firmware Version Firmware version currently installed on your device.
System Time System time for your device.
System Uptime Your device's operating time since the last time the system
was started in the format HH:MM:SS.
Basic Setup Set up the Internet connection for one or more virtual connections
(see below).
Local Network Define the basic settings for the local network and configure the
DHCP server (see page 15).
Note:
The access data is saved in the Gigaset SE587 WLAN dsl during configuration. If the
device is passed on to someone else for any reason, you should always first restore the
factory settings (page 33). Otherwise, unauthorised persons may use your Internet
access at your expense.