Schablone 2004_08_26 Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / cover_front_587.fm / 13.11.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / SE587_IVZ.fm / 12.12.2007 Contents Schablone 2004_08_26 Contents The Gigaset SE587 WLAN dsl . . . . . . . . . . . . . . . . . . 4 The device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / SE587_IVZ.fm / 12.12.2007 Contents Schablone 2004_08_26 Local network configuration . . . . . . . . . . . . . . . . . 36 IP addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Computer names and workgroups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting up a wireless network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / introduction.fm / 12.12.2007 The Gigaset SE587 WLAN dsl Schablone 2004_08_26 The Gigaset SE587 WLAN dsl The Siemens Gigaset SE587 WLAN dsl is a powerful but easy-to-use communications device for connecting your PCs or local area network (LAN) to the Internet (via ADSL) or for connecting a set-top box to watch IPTV. The Gigaset SE587 WLAN dsl contains an integrated ADSL modem enabling you to access the Internet easily.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / introduction.fm / 12.12.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / introduction.fm / 12.12.2007 The Gigaset SE587 WLAN dsl Schablone 2004_08_26 LED displays The upper side of the device has LED displays that show the operating state and simplify installation and troubleshooting in the network. The LEDs show the following: LED Power State Status On (green) The device is powered on and has been booted successfully.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / introduction.fm / 12.12.2007 The Gigaset SE587 WLAN dsl Schablone 2004_08_26 Safety precautions u Only use the router with the mains adapter supplied. u The mains adaptor provided is only designed for use in the UK. If the adaptor is to be used in other countries, ensure the specification ratings are not exceeded. u Protect the equipment from moisture. u Never open the router.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / introduction.fm / 12.12.2007 Schablone 2004_08_26 The Gigaset SE587 WLAN dsl Security functions The Gigaset SE587 WLAN dsl offers comprehensive security measures: u Firewall protection against unauthorised access from the Internet With the firewall, the Gigaset SE587 WLAN dsl offers comprehensive protection against hacker attacks.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / introduction.fm / 12.12.2007 Schablone 2004_08_26 The Gigaset SE587 WLAN dsl Information for experienced users The default settings for your Gigaset SE587 WLAN dsl are: – IP address: 192.168.1.1 – Subnet mask: 255.255.255.0 – Radio channel: Automatic – SSID: individual preset – Encryption: WPA-PSK (with pre-shared key), individual preset The individual preset SSID and pre-shared key are shown on the label on the bottom of the device (see page 4).
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 The user interface Schablone 2005_05_02 The user interface You have performed the steps on the start-up CD and successfully connected a computer to the Gigaset SE587 WLAN dsl. You can now use the browser-based user interface for a more detailed configuration of the Gigaset SE587 WLAN dsl or to get information on the configuration and operation. As Internet browser we recommend Microsoft Internet Explorer V 6.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 The user interface Schablone 2005_05_02 The user interface is opened displaying the Status pages first (see page 12). The configuration program ends automatically if no entry is made within a time period of 10 minutes. Note: u For security reasons you should change the predefined password at a later stage. u You can set up more user IDs and assign passwords via the user interface.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Status information Schablone 2005_05_02 Elements in the user interface The user interface screens contain the following buttons: Transfers the settings you have made to the Gigaset SE587 WLAN dsl configuration. Deletes all the entries on a screen since the last time you clicked Save Settings. Click the help link to display explanations about the current user interface screen.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Status information Schablone 2005_05_02 Internet The Internet page shows information about the configuration of the Internet connection(s). ì In the Status menu, select Internet. Internet Status PVC Connection Select the virtual connection (PVC), for which the following information should be displayed. Three PVCs have been configured.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Status information Schablone 2005_05_02 Local Network The Local Network page shows information about the local network settings. ì In the Status menu, select Local Network. MAC Address Local MAC address of the device’s LAN interface. IP Address Local IP address of the device. LAN Subnet Mask Subnet mask used in the local network. DHCP Server Shows if the DHCP server of the device is enabled or disabled.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Basic configuration Schablone 2005_05_02 RTS Threshold RTS (Ready to send) Threshold defines the latency between the message "Ready to send" and the sending of the next data packet. ì Click Refresh to refresh this screen and update the displayed data. Device You will find the most important device data on the Device screen in the Status menu.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Schablone 2005_05_02 Basic configuration tion can lead to problems with your Internet connection. If you want to set up your Internet connection manually or set up additional virtual connections you need your Internet service provider's access data and technical information for the configuration. You will find the access data you require in the documentation you received from Tiscali.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Basic configuration Schablone 2005_05_02 ì If you want to configure a connection, select (empty) from the PVC selection option menu. ì You have to specify the Internet Connection Type, so that the Gigaset SE587 WLAN dsl works correctly with your ISP's equipment. ì Enter the data required according to the Internet Connection Type you have chosen. ì Click Save Settings to apply your settings.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Schablone 2005_05_02 Basic configuration Defining the private IP address for the Gigaset SE587 WLAN dsl On this screen you can change the device's Private IP address. The preset IP address is 192.168.1.1. This is the address under which the device can be reached in the local network. It can be freely assigned from the block of available addresses.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Basic configuration Schablone 2005_05_02 ì Select NO for Use Default Range and define the range of IP addresses the Gigaset SE587 WLAN dsl should use to automatically assign IP addresses to the PCs. Define the Start IP Address and the End IP Address. ì The lease time indicates how long the client may use the allocated IP configuration before the DHCP server can assign a new IP address.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Advanced configuration Schablone 2005_05_02 Advanced configuration Wireless Settings If you have implemented wireless PC communication via the Gigaset SE587 WLAN dsl, you should improve the security of your wireless network via the Wireless menu.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Schablone 2005_05_02 Advanced configuration Wireless Network Name (SSID) For the wireless network components to be able to communicate with one another, they must use the same SSID (Service Set Identifier). The SSID for the Gigaset SE587 WLAN dsl is individually preset. The preset SSID is shown on the label on the bottom of the device (see page 4).
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Schablone 2005_05_02 Advanced configuration If all components of your wireless network provide this encryption method there is no need to change any settings on this page. If not, or if you want to change the preset key (e. g. if unauthorised persons have access to your device), you can configure the encryption for your wireless network on this page.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Schablone 2005_05_02 Advanced configuration WEP encryption If WPA is not supported by all components in your wireless network, we recommend that you activate WEP Encryption on the components. You can choose either the standard 64-bit key or the more robust 128-bit key. The keys are generated in hexadecimal format.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Advanced configuration Schablone 2005_05_02 ì Select one of the four keys as the Default Transmit Key. This is the key which should currently be used for encryption. Note: u It is very important that you make a note of the key(s) that have been entered or generated. You will need this information to configure the wireless network adapters properly.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Advanced configuration Schablone 2005_05_02 Access Restrictions The Access Restriction function allows you to define rules for blocking access to the Internet for various services and for one or more PCs. You can permit or block access to URLs at certain times. ì In the Access Restrictions menu, select Internet Access.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Schablone 2005_05_02 Advanced configuration IP Filters In the IP filter list you can add the PCs for which access should be restricted. ì Select the add box to activate the fields in a row to create a new entry. ì In the Host IP Address field, enter the IP address of the respective PC. How to find out the IP addresses of the individual PCs is described in chapter "Local network configuration" on page 36.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Schablone 2005_05_02 Advanced configuration URL filter The URL filter allows you to block or allow access to specific Internet domains. ì Select the add box to activate the fields in a row to create a new entry. ì Enter the URL of the domain to be blocked or allowed in the Domain Filter field. The domain is blocked or allowed including all subdomains.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Schablone 2005_05_02 Advanced configuration You can use the NAT settings to configure the Gigaset SE587 WLAN dsl to carry out the following tasks: u Set up the Gigaset SE587 WLAN dsl as a virtual server by configuring Port Forward- ing (see below). u Open the NAT firewall for a selected PC (page 29).
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_router.fm / 12.12.2007 Advanced configuration Schablone 2005_05_02 ì In the Local port field, enter the internal port number to which service requests are to be forwarded. ì Enter the IP address of the PC that provides the service in the Local IP field. How to find out the IP addresses of the individual PCs is described in chapter "Local network configuration" on page 36.
Gigaset SE587 WLAN dsl/ eng / A31008-N1083-L171-1-7619 / admin_router.fm / 12.12.2007 Administration Schablone 2005_05_02 Administration The Gigaset SE587 WLAN dsl user interface includes several helpful functions for administering your device. Management provides functions to enable or restrict access to the configuration user interface (page 30). Log displays logged information about the operation (page 32).
Gigaset SE587 WLAN dsl/ eng / A31008-N1083-L171-1-7619 / admin_router.fm / 12.12.2007 Schablone 2005_05_02 Administration Authentication To access the configuration user interface of your Gigaset SE587 WLAN dsl users must login with a user ID and an assigned password. The existing user IDs are shown in the authentication list. You can change the preset password for the default user admin here. Creating a new user ID ì To create a new user click on Add New User.
Gigaset SE587 WLAN dsl/ eng / A31008-N1083-L171-1-7619 / admin_router.fm / 12.12.2007 Schablone 2005_05_02 Administration UPnP IGD (Universal Plug and Play) UPnP allows devices to offer their own network services and automatically use services offered in the network. UPnP IGD (Internet Gateway Device) comes with a solution for routers which support NAT (Network Address Translation, see page 27).
Gigaset SE587 WLAN dsl/ eng / A31008-N1083-L171-1-7619 / admin_router.fm / 12.12.2007 Administration Schablone 2005_05_02 Factory Defaults You can reset the Gigaset SE587 WLAN dsl to the factory settings. You should do this only if you want to make the device available to others or exchange it through the dealer. In this case unauthorised persons could use the Internet access data at your expense. W Do not perform this action without first consulting the Tiscali hotline.
Gigaset SE587 WLAN dsl/ eng / A31008-N1083-L171-1-7619 / admin_router.fm / 12.12.2007 Administration Schablone 2005_05_02 ì In the text field, enter the file with the new firmware that you have downloaded from the Internet or click Browse to search for the file in your PC's file system. ì Click Upgrade. The firmware will now be updated. W Do not switch off the Gigaset SE587 WLAN dsl during the updating procedure and do not interrupt the power supply. Switching off the device can make it unusable.
Gigaset SE587 WLAN dsl/ eng / A31008-N1083-L171-1-7619 / admin_router.fm / 12.12.2007 Administration Schablone 2005_05_02 Restoring the saved configuration ì In the text field, enter the file with the saved configuration or click Browse to search for the file in your PC's file system. ì In the file system, select the backup file that you want to use to restore the configuration. ì Click Restore. The configuration will now be updated.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Local network configuration Modern computers running Windows Vista, Windows XP, Windows 2000 or Mac OS X operating systems are usually already configured on delivery to operate without difficulty in a wired local network (Ethernet/LAN) or wireless network (WLAN). The connection to a router or access point is established automatically in this case.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration Information on assigning static IP addresses You define the private IP addresses for the computers in your local network yourself. Addresses from an address block reserved for private use should be used. This is the address block 192.168.0.1 - 192.168.255.254 Example: PC 1: 192.168.1.2 PC 2: 192.168.1.3 etc.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Setting up a wireless network A wireless network connection is made using a wireless adapter that must be installed on your computer. You may first have to connect a wireless adapter to your notebook or your computer. For example, this can be a Gigaset USB Adapter, a Gigaset USB Stick or a Gigaset PC Card, but also a different IEEE 802.11n, 802.11g or 802.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Windows Vista ì Click the network symbol in the status area of the taskbar to display the wireless networks in the current environment. ì Click Connect or disconnect. A list of all available wired and wireless networks (WLANs) is displayed (see page 39).
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration ì To sign your computer on to your own wireless network, double-click the name (SSID) of your network. If encryption is defined on the Gigaset SE587 WLAN dsl, you will be asked to type in the key entered there (WEP key or Pre-Shared Key). ì Enter the appropriate key. ì Click Connect. The wireless connection is established automatically.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Mac OS X If Mac OS X receives signals of wireless networks in the current environment this will be indicated by the symbol for the wireless network connection in the status area of the menu bar.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Network configuration with Windows Vista Showing networks You can view the available networks by clicking the ì Click the icon. Networks that are currently connected are displayed. ì Click Network and Sharing Center. 42 icon on the taskbar.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration An overview of your PC's network connections are displayed in the Network and Sharing Center. You can start all actions for your network configuration from here.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration Obtaining an IP address automatically If the DHCP server of your router/access point is active and the PC is to obtain its IP address automatically, the Obtain an IP address automatically and Obtain DNS server address automatically options must be activated. ì Check whether these options are selected and mark them if necessary.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Selecting a computer name and workgroup Your PC is assigned a name during installation and assigned to the default workgroup WORKGROUP. To change the name or the workgroup assignment, you have to: ì Click Start - Control Panel – System and Maintenance. ì Click the entry Show computer name under System.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration Changing the settings for IP addresses The IP addressing settings can be checked and modified as follows: ì Double-click the wireless network or local area connection used to connect your PC to the Gigaset SE587 WLAN dsl. The status window for the connection is opened.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration ì Click Properties. ì Select Internet Protocol (TCP/IP) and click Properties.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration Obtaining an IP address automatically If the DHCP server of your router/access point is active and the PC is to obtain its IP address automatically, the Obtain an IP address automatically and Obtain DNS server address automatically options must be activated. ì Check whether these options are selected and mark them if necessary.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Selecting a computer name and workgroup Your PC is assigned a name during installation and assigned to the default workgroup WORKGROUP. To change the name or the workgroup assignment, you have to: ì Click Start - Control Panel – System. ì Select the Computer Name tab. The name of the PC and its workgroup are displayed in the window.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration Changing the settings for IP addresses The IP addressing settings can be checked and modified as follows: ì Double-click the wireless network or local area connection used to connect your PC to the Gigaset SE587 WLAN dsl. The status window for the connection is opened. ì Click Properties. ì Select Internet Protocol (TCP/IP) and click Properties.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration Obtaining an IP address automatically If the DHCP server of your router/access point is active and the PC is to obtain its IP address automatically, the Obtain an IP address automatically and Obtain DNS server address automatically options must be activated. ì Check whether these options are selected and mark them if necessary.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Selecting a computer name and workgroup Your PC is assigned a name during installation and assigned to the default workgroup WORKGROUP. To change the name or the workgroup assignment, you have to: ì Click Start – Settings – Control Panel – System. ì Select the Network Identification tab and click Properties.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration ì Select Client as the network component type and click Add. ì Under Manufacturers select Microsoft and under Network Clients select Client for Microsoft Networks. ì Confirm this with OK. Selecting a computer name and workgroup You now have to specify a name for the PC and assign it to a workgroup.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Installing the TCP/IP protocol The TCP/IP protocol ensures that the PCs in the network can communicate with each other. You must first install this protocol for the network adapter that establishes the connection with the Gigaset SE587 WLAN dsl. ì In the Network window, change from the Identification tab to Configuration.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Making TCP/IP settings The TCP/IP protocol requires certain settings, which you should now make so that it can function smoothly. ì In the Network window, change to the Configuration tab. ì Select the TCP/IP entry for your network card. ì Click Properties. ì Open the IP Address tab.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Obtaining an IP address automatically ì If Obtain an IP address automatically has been activated, your PC is already configured for DHCP. Click Cancel and close the following windows with OK to start your network configuration. You may be prompted to insert your Windows installation CD. Follow the instructions in the installation procedure.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration ì Click OK. ì Finish the network configuration with OK. You may be prompted to insert your Windows installation CD. Follow the instructions in the installation procedure. Once the copying procedure is completed, you will be prompted to reboot your system. ì Click Yes. The PC will then be shut down and rebooted.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Network configuration with Mac OS X Showing networks To configure your network click the apple icon and choose System Preferences. on the left side of the menu bar ì Choose Network. ì Choose from the list Show the option AirPort, if your Mac is connected wirelessly to the network and choose the option Built-in Ethernet if your Mac is connected via cable.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Changing the settings for IP addresses The IP addressing settings can be checked and modified as follows: Obtaining an IP address automatically If the DHCP server of your router/access point is active and your Mac is to obtain its IP address automatically, you must choose the option DHCP from the Configure IPv4 list.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration ì ì ì ì Select the tab TCP/IP. ì ì ì ì Enter the IP address for the router/access point in the Router field. Choose the option Manually from the Configure IPv4 list. Enter the IP address for your Mac in the IP Address field. Enter the subnet mask to be used in your network in the Subnet Mask field.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration Information for Windows Vista: Windows Vista requires more advanced rights to execute this command (even if your user account has administrator rights). Carry out the following steps: ì ì ì ì Click Start. Enter Command prompt in the search box. Right-click Command Prompt in the result list and select Run as administrator.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Windows 98 SE, ME ì Click Start – Run. ì Enter WINIPCFG and click OK. There may be a slight delay before the IP Configuration window appears. ì Select your network adapter from the selection list. ì Click Release and then Renew. If the default IP address of the router/access point (192.168.1.1) was not changed, the IP address should now read 192.168.1.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Local network configuration Schablone 2004_08_26 Mac OS X ì Click the Apple icon on the left side of the menu bar and choose System Preferences. ì Choose Network. ì Choose from the list Show the option AirPort, if your Mac is connected wirelessly to the network and choose the option Built-in Ethernet if your Mac is connected via cable. ì Select the tab TCP/IP. ì Click the option Renew DHCP Lease.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration Please remember: If the IP address of the router/access point has been changed, enter the new IP address. The ping command sends data packets to the Gigaset SE587 WLAN dsl with the specified IP address and checks whether the router responds.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007 Schablone 2004_08_26 Local network configuration You will find the IP address next to IPv4 IP Address and the MAC address next to the entry Physical Address. Windows XP SP2 This is how you determine the IP and MAC address of PCs: ì Click Start – Control Panel – Network Connections to view the current network connections. ì Double-click the network connection used to connect your PC to the Gigaset SE587 WLAN dsl.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / appendix.fm / 12.12.2007 Appendix Schablone 2004_08_26 Appendix Troubleshooting This section describes common problems and their solutions. The Gigaset SE587 WLAN dsl is easy to monitor thanks to its LED displays. Problems can be quickly identified. If you cannot solve connection problems after checking the LED displays, please consult the other sections shown in the following table. Symptom Power lamp does not light up.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / appendix.fm / 12.12.2007 Appendix Schablone 2004_08_26 Symptom Possible cause and remedial actions You cannot open a con- The wireless network adapter is not using the correct SSID. nection from a wireless ì Connect the wireless clients to the wireless network device to the Gigaset with the correct SSID. The preset SSID is shown on the SE587 WLAN dsl. label on the bottom of the device.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / appendix.fm / 12.12.2007 Schablone 2004_08_26 Appendix Symptom Possible cause and remedial actions No connection to the Gigaset SE587 WLAN dsl's configuration interface. ì Use the ping command to check whether you can establish a network connection to the Gigaset SE587 WLAN dsl. ì Check the network cable between the PC you want to use to manage the device and the Gigaset SE587 WLAN dsl.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / appendix.fm / 12.12.2007 Appendix Schablone 2004_08_26 Specifications Interfaces 1 DSL modem RJ11, ITU G.992.5, Annex A 4 LAN RJ45, 10Base-T/100Base-TX, Autosensing, MDI/MDIX WLAN IEEE 802.11g Wireless properties Frequency range 2,400 to 2,484 GHz ISM band Number of channels 13 Transmission rate IEEE 802.11b: up to 11 Mbps IEEE 802.11g: up to 54 Mbps Range approx.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / appendix.fm / 12.12.2007 Appendix Schablone 2004_08_26 Authorisation This device is intended for operation in the United Kingdom with an analogue phone line and DSL via Annex A. Country-specific requirements have been taken into consideration. We, Siemens Home and Office Communication Devices GmbH & Co. KG, declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/EC.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Glossary Schablone 2004_08_26 Glossary Access point An access point, such as the Gigaset SE587 WLAN dsl, is the centre of a wireless local network (WLAN). It handles the connection of the wireless linked network components and regulates data traffic in the wireless network. The access point also serves as an interface to other networks, for example an existing Ethernet LAN or via a modem to the Internet.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary BSSID Basic Service Set ID BSSID permits unique differentiation of one wireless network (WLAN) from another. In Infrastructure mode, the BSSID is the MAC address of the Access point. In wireless networks in Ad-hoc mode, the BSSID is the MAC address of any one of the participants. Client A client is an application that requests a service from a server.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary DNS Domain Name System DNS permits the assignment of IP addresses to computers or Domain names that are easier to remember. A DNS server must administer this information for each LAN with an Internet connection. As soon as a page on the Internet is called up, the browser obtains the corresponding IP address from the DNS server so that it can establish the connection.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary DynDNS Dynamic DNS The assignment of Domain names and IP addresses is handled by the Domain Name Service (DNS). This service is now enhanced with so-called Dynamic DNS (DynDNS) for Dynamic IP addresses. This enables the use of a network component with a dynamic IP address as a Server on the Internet.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary Half duplex Operating mode for data transmission. Only one side can send and/or receive data at the same time. See also: Full duplex HTTP proxy An HTTP proxy is a Server that network components use for their Internet traffic. All requests are sent via the proxy.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary Internet The Internet is a wide-area network (WAN) linking several million users around the world. A number of Protocols have been created for exchanging data, and these are known collectively as TCP/IP protocol stack. All participants on the Internet can be identified by an IP address. Servers are addressed by Domain names (e.g. siemens.com).
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary ISP See Internet service provider LAN Local network A local area network (or local network) links network components so that they can exchange data and share resources. The physical range is restricted to a particular area (a site). As a rule the users and operators are identical. A local network can be connected to other local networks or to a wide-area network (WAN) such as the Internet.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary NAT Network Address Translation NAT is a method for converting IP addresses (Private IP addresses) within a network into one or several Public IP addresses on the Internet. With NAT, several network components in a LAN can share the router's public IP address to connect to the Internet.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary PPPoA Point-to-Point Protocol over ATM PPPoA is a Protocol for connecting network components in a local Ethernet network to the Internet via an ATM network. PPPoE Point-to-Point Protocol over Ethernet PPPoE is a Protocol for connecting network components in a local Ethernet network to the Internet via a modem.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary Roaming Roaming extends the range of a wireless LAN by using several Access points that use the same SSID and the same radio channel and are linked via Ethernet. The PCs in the network can switch dynamically between several access points without losing the existing network connection. Router A router directs data packets from one local network (LAN) to another via the fastest route.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary Subnet mask The subnet mask determines how many parts of IP addresses of a network represent the network number and how many parts the computer number. If the subnet mask is in a network that is administered by the Gigaset SE587 WLAN dsl, for example 255.255.255.0, the first three parts of the IP address form the network number and only the final part can be used for assigning host numbers.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary UPnP Universal Plug and Play UPnP technology is used for the spontaneous linking of home or small office networks. Devices that support UPnP carry out their network configuration automatically once they are connected to a network. They also provide their own services or use services of other devices in the network automatically.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / glossary.fm / 12.12.2007 Schablone 2004_08_26 Glossary WEP Wired Equivalent Privacy WEP is a security protocol defined in the IEEE 802.11 standard. It is used to protect wireless transmissions in a WLAN against unauthorised access through Encryption of the data transmitted. WLAN Wireless LAN Wireless LANs enable network components to communicate with a network using radio waves as the transport medium.
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / SE587_SIX.fm / 12.12.2007 Index Schablone 2004_08_26 Index Numerics 10/100 Mbps switch port . . . . . . . . . . . 5 128-bit key . . . . . . . . . . . . . . . . . . . . 23 64-bit key . . . . . . . . . . . . . . . . . . . . . 23 802.11b . . . . . . . . . . . . . . . . . . . . . . 38 802.11g . . . . . . . . . . . . . . . . . . . . . . 38 A Access point . . . . . . . . . . . . . . . . . . . 71 Access restriction . . . . . . . . . . . . . . . .
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / SE587_SIX.fm / 12.12.2007 Schablone 2004_08_26 Index Domain Name Service see DNS DoS attack . . . . . . . . . . . . . . . . . . . . . DSL . . . . . . . . . . . . . . . . . . . . . . . . . . status . . . . . . . . . . . . . . . . . . . . . . . Dynamic DNS see DynDNS Dynamic Host Configuration Protocol, see DHCP Dynamic IP address . . . . . . . . . . . . . . DynDNS . . . . . . . . . . . . . . . . . . . . . . .
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / SE587_SIX.fm / 12.12.2007 Schablone 2004_08_26 Index IP address, assigning statically Mac OS X . . . . . . . . . . . . . . . . . . . . Windows 2000 . . . . . . . . . . . . . . . . Windows 98 . . . . . . . . . . . . . . . . . . Windows Vista . . . . . . . . . . . . . . . . Windows XP . . . . . . . . . . . . . . . . . . IP filter . . . . . . . . . . . . . . . . . . . . . . . . IP protocol . . . . . . . . . . . . . . . . . . . . . ipconfig / release .
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / SE587_SIX.fm / 12.12.2007 Schablone 2004_08_26 Index PPPoA . . . . . . . . . . . . . . . . . . . . . . . . 79 PPPoE . . . . . . . . . . . . . . . . . . . . . . . . 79 Predefined application . . . . . . . . . . . . 28 Pre-shared key . . . . . . . . . . . . 22, 40, 41 Private IP address . . . . . . . . . . . . . . . . 79 Problem solving . . . . . . . . . . . . . . . . . 66 Protocol . . . . . . . . . . . . . . . . . . . . . . . 79 Public IP address .
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / SE587_SIX.fm / 12.12.2007 Schablone 2004_08_26 Index URL . . . . . . . . . . . . . . . . . . . . . . . . . . URL filter . . . . . . . . . . . . . . . . . . . . . . User Datagram Protocol see UDP User ID creating . . . . . . . . . . . . . . . . . . . . . editing . . . . . . . . . . . . . . . . . . . . . . User interface elements . . . . . . . . . . . . . . . . . . . . functions . . . . . . . . . . . . . . . . . . . . idle time. . . . . . . . . . . .
Schablone 2004_08_26 Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / cover_back.fm / 14.11.2007 Issued by Siemens Home and Office Communication Devices GmbH & Co. KG Schlavenhorst 66 D-46395 Bocholt © Siemens Home and Office Communication Devices GmbH & Co. KG 2007 All rights reserved. Subject to availability. Rights of modification reserved. www.siemens.
