Operation Manual

69
Time functions
7G_8G_HS_an_ ISDN-Basen / en / A31008-M1751-X101-2-7619 / time_calendar.fm / 29.10.2007
Entering the start and end time for night service
By default, the Start time is pre-set to 20:00 or 8:00 pm, and 08:00 or 8:00 am for the
End time.
To activate/deactivate Saturday/Sunday all day night service
If Sat/Sun all day is set, then night service is active between the indicated start and end
times from Mon-Fri, and all day at the weekend. If Sat/Sun all day is deactivated, calls
are diverted at the weekend between the set start and end times.
By default, Sat/Sun all day is activated.
Activating/ deactivatingnight service
You can only activate night service if you have entered a divert destination for the
receive MSN and if there is no divert destination currently activated for it.
If night service is activated for an MSN, Night service is marked with ‰.
v / w ¢ Ð ¢ Base ¢ Night service
s MSN1:
Select the MSN and confirm, e. g. MSN1: Anna.
either ...
To enter the start time:
s
Start time
Select and confirm.
~
Enter the start time (4 digit).
or ...
To enter the end time:
s
End time
Select and confirm.
~
Enter the end time (4-digit).
... then
Í
Press the display key to open the submenu.
Save entry
Confirm.
OK
OK
OK
OK
v / w ¢ Ð ¢ Base ¢ Night service
s MSN1:
Select the MSN and confirm, e. g. MSN1: Anna.
s Sat/Sun all day
Select and confirm (‰ =On).
OK
OK
v / w ¢ Ð ¢ Base ¢ Night service
s MSN1:
Select the MSN and confirm, e. g. MSN1: Anna.
either ...
To activate night service:
s
Activate?
Select and confirm.
or ...
To deactivate night service:
s
Deactivate?
Select and confirm.
OK
OK
OK