Operation Manual

66
Security settings
7G_8G_HS_an_ ISDN-Basen / en / A31008-M1751-X101-2-7619 / security.fm / 29.10.2007
Emergency numbers
By default, the country-specific emergency numbers are entered. These cannot be
edited or deleted. You may enter five emergency numbers of your own choice.
Setting up, editing, reading and deleting personal emergency numbers
Dialling emergency numbers
Requirement: The handset is blocked for external dialling (page 65).
If the dialled number does not match the emergency number entered, the call is
rejected with the display "Number is not emergency no.".
i
An emergency number may also be dialled from a handset with limited
authorisation (e. g. Internal only).
v / w ¢ Ð ¢ Base ¢ Settings ¢ Security ¢ Emergency nos.
s <no entry>
Select list entry, e. g. <no entry>.
Í
Press the display key to open the submenu.
either ...
To set up or edit an emergency number:
Change number
Confirm.
~
Enter new emergency number (up to 32 digits) or
edit existing emergency number. You can also copy
the number from the directory s or call-by-call list
C.
Í
Press the display key to open the submenu.
Save entry
Confirm.
or ...
To view an emergency number:
s
Display number
Select and confirm.
or ...
To delete an emergency number:
s
Delete number
Select and confirm.
OK
OK
OK
OK
i
If your telephone is connected to a PABX, you must enter the valid access
code (e. g. 0 ; see page 84) before the emergency number. This also
applies to preset emergency numbers, for which you need to re-enter an
alternative, e. g. "0110" and "0112".
c
Press the Talk key.
[ RRRRRRRRRRRRRRRRRRRRRRRRRRR]
EMERG.
Press the display key.
... then
Dial emergency number.
~
Enter the emergency number.