Operation Manual

17
Setting up the base station – Getting started wizard
7G_8G_HS_an_ ISDN-Basen / en / A31008-M1751-X101-2-7619 / starting.fm / 29.10.2007
Entering your phone numbers (MSNs) manually and entering names for MSNs
The display shows: Enter own numbers (MSN)?
The MSNs entered will automatically be assigned to all registered handsets as receive
MSNs. MSN1 will automatically be assigned to all registered handsets as the send MSN.
This procedure is then repeated for MSN2 to MSN9 and for MSN0.
To set the device type:
If your base station has the option of connecting an analogue terminal, you must set the
device type (see user guide for base station).
The display shows: Set device type?
If you have connected an analogue device to your base station, select
YES.
The display shows: Set device type for internal 21?, select
YES.
Select the appropriate device type and confirm with (‰ = on). For the possible set-
tings, refer to the user guide for the base station.
Briefly press the ¯ display key to continue.
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
Press the display key to confirm the prompt.
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
Press the display key to confirm the prompt.
~
Enter name.
Entering a name for an MSN is optional.
s~
If necessary, scroll to the line <Number> and enter
the MSN. If the MSBNs were found automatically,
the numbers will already be entered.
Í
Press the display key to open the submenu.
s
Save entry
Select the menu item and confirm.
OK
On base station:
SX205isdn SX255isdn SX303isdn SX353isdn
OK