Operation Manual

108
Appendix
7G_8G_HS_an_ ISDN-Basen / en / A31008-M1751-X101-2-7619 / appendix.fm / 29.10.2007
◆ The duration of the Guarantee shall not be extended by services rendered under the
terms of the Guarantee.
◆ Insofar as no Guarantee default exists, Siemens reserves the right to charge the cus-
tomer for replacement or repair.
◆ The above provisions does not imply a change in the burden of proof to the detriment
of the customer.
To invoke this Guarantee, please contact the Siemens helpdesk on 1850 777 277. This
number is also to be found in the accompanying user guide.
PC Interface (not Gigaset C47H)
Depending on your handset, you can connect the handset to your computer via Blue-
tooth or a data cable. Your computer can then communicate with your handset using
the "Gigaset QuickSync" program (free download from www.siemens.com/gigaset
).
You can access your handset's directory, and, depending on your handset, you can
download sounds and CLIP pictures from your computer onto the handset (please refer
to the user guide belonging to your handset).
During the transfer of data between handset and PC, you will see
ß on the display.
During this time, it is not possible to use the keypad and incoming calls will be ignored.
Writing and editing a text message
The following rules apply when writing a text message:
◆ Control the cursor with qr.
◆ Characters are added to the left of the cursor.
◆ Press the star key
*
to display the table of special characters. Select the required
character and press the display key
§Insert§ to insert the character at the cursor posi-
tion.
◆ The first letter of the name of directory entries is automatically capitalised, followed
by lower case letters.
Writing text messages/names (without predictive text)
Press the relevant key several times to enter letters/characters.
When you press a key and hold it, the characters from that key appear in the bottom dis-
play line and are highlighted one after the other. When you release the key the high-
lighted character is inserted into the input field.
Setting upper/lower case or digits
Press the hash key # briefly to switch from "Abc" mode to "123" and from "123" to
"abc" and from "abc" to "Abc" (upper case: 1st letter upper case, all others lower case).
Press the hash key # before entering the letter.
You can see in the display whether upper case, lower case or digits are selected.