Operation Manual

50
Setting the base
Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / T-NetBox-registration.fm /
Version 5, 03.04.2011
Changing the system PIN
You can change the base's 4-digit
default system PIN ("0000") to a 4-
digit PIN known only to yourself.
Gigaset E310A: Setting a system PIN
enables remote operation of the
answering machine (¢ page 38).
§Menu§ ¤ q Settings ¤ §OK§
¤ q Base ¤ §OK§
¤ q System PIN ¤ §OK§
¤ PIN: (Enter current system PIN)
¤
§OK§ ¤ New PIN: (Enter new
system PIN) ¤
§OK§
Resetting the system PIN
If you have forgotten your system
PIN, you can reset the PIN to the
original code 0000 using the but-
ton on the base. This will also reset
other settings; see the section enti-
tled "Resetting the base to the
default settings".
Resetting the base to the
default settings
When restoring default settings:
u Individual settings are reset
u All lists are deleted
u Eco Mode and Eco Mode+ are
deactivated.
The date and time are retained.
Resetting the base via the menu
When resetting via the menu
u Handsets are still registered
u The system PIN is not reset.
§Menu§ ¤ q Settings ¤ §OK§
¤ q Base ¤ §OK§
¤ q Base Reset ¤ §OK§
Resetting the base using the
button on the base
When resetting the base using the
button on the base
u All handsets are de-registered
and
u The system PIN is reset to the orig-
inal code 0000
Proceed as follows:
¤ Remove the mains cable from the
base.
¤ Hold down the registration/pag-
ing key ù on the base (¢ page 2)
while reconnecting the power
cable to the base. Hold the key
down for at least 5 seconds.
Please note
The answering machine is ready
for use approx. 15 seconds after
the base has been connected or
reset.
Please note
All handsets are de-registered
and must be re-registered. All set-
tings are reset to the default set-
tings.