Operation Manual

42
Using multiple handsets
Gigaset E310/E310A / Australia / A31008-M2301-C401-1-7619 / T-NetBox-registration.fm /
Version 5, 03.04.2011
The registration process is cancelled
after 60 seconds. If the handset has
not registered within this time,
repeat the process.
Registering other handsets
You can register other Gigaset hand-
sets and handsets for other devices
with GAP functionality as follows.
De-registering handsets
You can de-register any other regis-
tered handset from any registered
Gigaset E310H handset.
§Menu§ ¤ q Settings ¤ §OK§
¤ q Handset ¤ §OK§
¤ q De-register HS ¤ §OK§
q Select the internal party/
parties you wish to
de-register and press
§OK§.
(The handset you are cur-
rently using is indicated
by <.)
~ Enter the current system
PIN and press
§OK§.
Locating a handset
("paging")
You can locate your handset using
the base.
¤ Briefly press the registration/pag-
ing key ù on the base
(¢ page 2).
¤ All handsets will ring at the same
time ("paging"), even if the ringer
melodies are switched off.
Ending paging
Briefly press the registration/paging
key ù on the base (¢ page 2) or
press the talk key c or end call key
a on the handset.
1) On the handset
§Menu§ ¤ q Settings ¤ §OK§
¤ q Handset ¤ §OK§
¤ q Register HS ¤ §OK§
¤ Enter the base system PIN
(default setting: 0000) ¤
§OK§
Registering flashes on the display.
2) On the base
Within 60 seconds of entering the
system PIN, press and hold the
registration/paging key ù on the
base (¢ page 2) (min. 3 seconds).
1) On the handset
¤ Start to register the handset as
described in its user guide.
2) On the base
¤ Press and hold the registration/
paging key ù on the base
(¢ page 2) for
approx. 3 seconds.