Operation Manual

Gi
gaset
DA
710
/
en
/
A
30350-
M
213-
R
101-2-7
W
19
/
us
i
ng.
f
m
/
19.07.2012
de en fr nl 5
1110-01
Control key
The telephone's functions are activated and the menu is navigated
using the control key. The functions offered depend on the operating
situation.
Writing and editing text
~ Enter text using the keypad.
Multiple letters and numbers are assigned to each key between
 and O and Q, * and #. The entry of a specific charac-
ter is carried out by pressing the corresponding key multiple times.
You will find a table of applicable characters in the Appendix
£ page 16.
To switch between capital letters (ABC), lower case (abc) and numbers
(123), press the shift key
L until the desired figure is briefly displayed
on the bottom right. This mode is not available in lines for telephone
number entry.
Moving the cursor
t s Press the control key up/downwards in order to move the
cursor to the left/right in the text.
Deleting/correcting characters
X Press the left-hand side u of the control key. The cha-
racter to the left of the cursor is deleted. Press and hold
down to delete the whole line.
Menu
The functions of your telephone are offered to you via a menu that con-
sists of several levels.
¤ Press the M key to open the menu.
The menu functions and submenu functions where necessary are dis-
played in list form.
¤ Scroll with the control key q to the required function and press
the right-hand side of the control key
v, ([) to confirm your
selection.
¤ Press u (X) in order to return to the previous menu level.
¤ Press the M key to return to the start menu.
Description of the menu selection steps
The steps to select a menu function are set out in these operating
instructions as follows:
M ¢ Phone setup ¢ Language
This is accessed as follows:
¤ Open the menu using the M key.
¤ Using the control key q, select the entry Phone setup and press
the right-hand side of the control key
v, ([).
¤ Using the control key q, select the entry Language and press the
right-hand side of the control key
v, ([).
Phonebook, call list and redial list
Phonebook, call list and redial list can be opened using the menu or
keys.
Using the menu
¤ Press the M key to open the menu.
¤ Select Call list (CLIP) or Phonebook or Redial in order to open the
desired list.
Using keys
Y Open the call list using the control key t.
Z Open the phonebook using the control key s.
I Open the redial list.
The first list entry will be displayed in each case.
¤ Scroll with the control key q to the desired entry and press the
right-hand side of the control key
v, ([) to open the context
menu.
In standby:
t
Y
Open the call list
s
Z
Open phonebook
t
s
In menus and lists:
Scrolls one entry upwards/downwards.
Hold down: Scrolls the list fast upwards/downwards.
While editing names and numbers:
Moves the cursor to the left/right.
Hold down: Moves the cursor fast to the left/right.
While pressing the direct dial key:
Displays long phone numbers completely.
u
In menus, lists and with direct dial keys:
Exits the menu, list or direct dial key.
While changing settings:
Terminates the action without changing the setting.
While editing names and numbers:
Deletes the character to the left of the cursor.
Hold down: Deletes the line.
If the entry is empty: Exits the editing mode.
v
Phone number entered or direct dial key pressed:
Dials the phone number.
In menus and lists:
Opens the submenu/context menu.
While editing entries/changing settings:
Saves the edits or activates the selected settings.
W
TU
V
Note
To exit the menu without saving any previous entries simply lift and
then hang up the handset. After a short time the display will then
once again show the standby mode.