Operation Manual

Gi
gaset
DA
710
/
en
/
A
30350-
M
213-
R
101-2-7
W
19
/
te
l
ep
h
ony.
f
m
/
19.07.2012
12 de en fr nl
1110-01
Setting the ringer
The following optional settings are available:
¤ Melody and volume
¤ VIP Melody
¤ Switching the ringer off
Setting the melody and volume
You can set the ringer melody and volume or switch the ringer off. There
are 16 different ringers available, the volume can be adjusted in 5 levels
(0=silent).
You can also change both settings directly using the keys while the tele-
phone is ringing (
£ page 9).
M ¢ Audio setup ¢ Ring tones
~ Select the required ringer.
D / E Set the volume for the ringer currently selected.
[ Press the control key to save the setting.
Setting the VIP Melody
You can set one of the ringers as VIP Melody. When you have assigned a
number from the phonebook VIP mode status (
£ page 9), an incoming
call from this number will be indicated with the VIP Melody ring tone.
M ¢ Audio setup ¢ VIP Melody
~ Select the required ringer.
D / E Set the volume for the ringer currently selected.
[ Press the control key to save the setting.
Setting the ring mode
If you do not wish to be disturbed, you can switch off the telephone's
ringer. The three following optional settings are available: All tones off,
VIP only (see above), All tones on (default setting).
M ¢ Audio setup ¢ Ringer mode
q Select the required setting and confirm with [.
[ Press the control key to save the setting.
Switching the ring tone off using the key
+ Hold the key down to switch the ring tone off and back on.
Once the ring tone has been switched off, this is indicated with the
k
symbol in the display.
Security settings
Locking the telephone
You can secure your telephone against unauthorised access by using the
Key lock and PIN entry, in order to lift the Key lock.
Setting up the Key lock
When the Key lock is activated, all keys are locked, with the exception of
the menu key, the hands-free/headset key and the stored emergency
numbers (
£ page 12).
Activating the Key lock
$ When the telephone is on stand-by, press and hold down
the lock key.
or
M ¢ Security ¢ Key lock
Deactivating the Key lock
$ Hold down the lock key.
or
M Press the menu key.
Q ... O If the preset PIN (0000) is changed, enter a 4-digit PIN and
confirm with
[.
Once the key lock has been switched on, this is indicated with the
i
symbol in the display.
Changing the PIN
The default setting for the Key lock PIN is 0000. You should change this
PIN in the interests of security.
M ¢ Security ¢ Change PIN
Q...O Enter a new 4-digit PIN and confirm with [.
Repeat the entry and re-confirm with
[.
Emergency calls
There are two emergency numbers stored in the telephone as a default
setting (110, 112). You can store an additional emergency number with
a max. of 28 digits. These emergency numbers can also be selected
when the Key lock is switched on.
Selecting an emergency number
c Lift the handset.
~ Enter the emergency number.
Emergency is indicated in the display.
Saving the emergency number
M ¢ Security ¢ Emergency
Q...O Enter the emergency number and confirm with [.
Note
The melodies are played over the speaker if you lift the handset
before commencing with the settings.
Q ... O Ringer 1 - 10
L Q ... L 5 Ringer 11 - 16
Note
The ring melody can only sound when the ring pulse arrives from the
telephone network. The length of the pulses may differ from network
to network. It is therefore possible that some ring tones for selection
may seem clipped. If this is the case please select another ring tone.
Q ... O Ringer 1 - 10
L Q ... L 5 Ringer 11 - 16
Note
If you have changed the telephone PIN you must always enter the PIN
after selecting the Security menu entry.