User guide

64
Making calls using network services
Gigaset C610-C610A IP / AUS / A31008-M2312-C401-1-7619 / netservices.fm / 03.04.12
Version 4, 16.09.2005
Optus:
You are on the phone and hear the beeps.
To put the first caller on hold and talk to the new caller (the caller on hold will hear
nothing):
u Press the recall key on your phone.
To return to the first caller:
u Press the recall key and put the new caller on hold. You can alternate between
the calls in this way.
Or
u Hang up the first call. The phone will ring again with the second caller. This
means that you will not be able to go back to the first caller.
For more information please contact Optus.
New Zealand:
Telecom NZ:
You are on the phone and hear four beeps.
To talk to the second caller:
u Press the recall key on your phone.
u To return to the first caller:
Press the recall key again and you will be able to continue your original conversa-
tion.
For more information please contact Telecom NZ.
Special settings for calls via VoIP
Activating/deactivating transfer – ECT (Explicit Call Transfer)
If the Transfer (ECT) function is activated, you can connect two external callers on
a VoIP connection with each other by pressing the end call key a (
¢ page 66).
This assumes that you are making an external call via one of your VoIP connections
and start an external consultation call.
You can activate/deactivate this function via your handset.
v
¢ Ç Select Services
Transfer (ECT)
Select and press
§OK§ (³= on).
Please note
You can use the Web configurator to make further settings for the call transfer
on a VoIP connection (
¢ page 195).