User guide

First steps

Gigaset C610-C610A IP / AUS / A31008-M2312-C401-1-7619 / starting.fm / 03.04.12

Version 4, 16.09.2005

Date/time

There are two methods of setting the date and time:

u By default, your phone is configured so that the date and time are transferred

from a time server on the Internet, provided it is connected to the Internet.

You can activate/deactivate the synchronisation with a time server via the

Web configurator (

¢ page 196).

u You can also set the date and time manually via the menu of one of the regis-

tered handsets (

¢ page 161).

To ensure you have the correct time for incoming calls and to use the alarm clock,

the date and time must be set.

Connecting the headset to the handset (optional)

You can connect a headset with 2.5 mm jack connectors.

See the relevant product page for information on recom-

mended headsets

www.gigaset.com

Attaching the belt clip (optional)

The handset has notches on each side to attach the belt clip.

¤ To attach – press the belt clip

onto the back of the handset

so that the protrusions on the

belt clip engage with the

notches.

¤ To remove – press the centre

of the belt clip firmly with

your right thumb, push the

fingernail of your left index

finger up between the clip

and the housing and pull the

clip in an upward direction.