User guide

205
Customer service & product warranty – Australia and New Zealand
Gigaset C610-C610A IP / AUS / A31008-M2312-C401-1-7619 / appendix.fm / 03.04.12
Version 4, 16.09.2005
On the Gigaset C610A IP:
An answering machine reports "PIN is incorrect" during remote operation.
You have entered the wrong system PIN.
¥ Repeat input of system PIN.
An answering machine is not recording any messages/has switched to answer only mode.
Its memory is full.
¥ Delete old messages.
¥ Play back new messages and delete.
An answering machine will not record a call or ends the recording.
1. An error tone sounds and the display shows Not possible.
¥ You are making the call via a broadband connection. A recording is not possible in this
case. The attempt by the base to establish a non-broadband connection instead has
failed.
2. The display shows AM memory full. Delete messages..
The answering machine's memory is full.
¥ Delete messages and then start recording again.
Or:
¥ End the call, delete old messages on the answering machine and then re-establish the
connection.
Exclusion of liability
Some displays may contain pixels (picture elements), which remain activated or
deactivated. As a pixel is made up of three sub-pixels (red, green, blue); it is pos-
sible that pixel colours may vary.
This is completely normal and does not indicate a fault.