User guide

16
First steps
Gigaset C610-C610A IP / AUS / A31008-M2312-C401-1-7619 / starting.fm / 03.04.12
Version 4, 16.09.2005
Initial charging and discharging of the batteries
The correct charge level can only be displayed if the batteries are first fully charged
and discharged.
¤ Place the handset in the charger for
ten hours.
¤ Then remove the handset from the
charger and do not replace it until the
batteries are fully discharged.
Please note
u After the first battery charge and discharge, you may place your handset in
the charger after every call.
u Always repeat the charging and discharging procedure if you remove the
batteries from the handset and reinsert them.
u The batteries may warm up during charging. This is not dangerous.
u After a while, the charge capacity of the batteries will decrease for technical
reasons.