User guide

162
Configuring the system settings
Gigaset C610-C610A IP / AUS / A31008-M2312-C401-1-7619 / settings.fm / 03.04.12
Version 4, 16.09.2005
Protecting against unauthorised access
Protect the phone system settings with a PIN known only to you. You have to enter
the system PIN if you register or de-register a handset, change local network set-
tings, perform a firmware update or reset the phone to default settings.
Changing the system PIN
You can change the phone's 4-digit system PIN (default setting: 0000) to a 4-digit
PIN known only by you.
Gigaset C610A IP: setting a system PIN enables remote operation of the answering
machine (
¢ page 130).
v ¢
Ï
Settings
¢ System ¢ System PIN
~ Enter the current system PIN if necessary and press §OK§.
~ Enter new system PIN.
§OK§ Press the display key.
Your own area code setting
Your area code (international and local area code) must be saved on the phone
before you can transfer phone numbers (e.g., in vCards).
Some of these numbers are already preset.
v
¢
Ï
Settings
¢ Te lep hony ¢Area Codes
Check that the (pre)set area code is correct.
¤ You can enter data in the following fields:
q Select/change input field.
r Navigate in the input field.
Ñ If necessary, delete number: press the display key.
~ Enter number.
§Save§ Press the display key.
Example:
•
Area Codes
International code:
00 - 61
Local area code:
0 - [ ]
Û
Save