User guide

137
ECO DECT
Gigaset C610-C610A IP / AUS / A31008-M2312-C401-1-7619 / add_features.fm / 03.04.12
Version 4, 16.09.2005
Status displays
Display icon
Ð i Ñ Ò
¼
red
Reception strength:
– Good to poor
– No reception
Ð white Eco Mode deactivated
Ð green Eco Mode enabled
¼ white Eco Mode+ enabled
(displays instead of the reception strength icon when in idle
status)
¼ green Eco Mode and Eco Mode+ activated
Please note
u When using Eco Mode+, you can ensure that the range of the base is suffi-
cient by pressing and holding the talk key c. You hear the dial tone if the
base can be reached.
u When Eco Mode+ is enabled:
– Call setup is delayed by approx. 2 seconds.
– Handset standby time is reduced by approx. 50%.
u Registering handsets that do not support Eco Mode+ causes the mode to be
deactivated on the base and all other handsets.
u Activating Eco Mode reduces the range of the base.
u Eco Mode/ Eco Mode+ and repeater support (¢ page 170) cancel each
other out, i.e., if you use a repeater, you cannot use Eco Mode and Eco
Mode+.