User guide

133
Using the network mailbox
Gigaset C610-C610A IP / AUS / A31008-M2312-C401-1-7619 / Net-AB.fm / 03.04.12
Version 4, 16.09.2005
Configuring a answering machine for quick dial
You can use quick dial to make direct calls to a network mailbox or the integrated
answering machine on the phone.
Assigning key 1, changing assignment
Quick dial settings are device-specific. You can assign a different answering
machine to key  on each registered handset.
No answering machine is preconfigured for quick dial in the default settings.
 Press and hold key .
Or:
v
¢
Ì
Voice Mail ¢ Set Key 1
The list of VoIP connections and the fixed line connection assigned to the handset
as receive connections is displayed. Net AM: xxx where xxx is replaced by the stand-
ard name in the connection (Net AM: IP1 to Net AM: IP6, Net AM: Fixed Line).
On the Gigaset C610A IP: this list contains the entry Answ. Machine for the local
phone answering machines.
s Select entry and press
§Select§ (Ø =on).
You have selected the local answering machine:
Quick dial is immediately activated for the local answering machines on the phone.
a Press and hold the end call key (idle status).
You have selected a network mailbox:
If a number is already stored for this network mailbox, quick dial is activated
immediately.
a Press and hold the end call key (idle status).
If no number is saved for the network mailbox, you are asked to enter the number
of the network mailbox.
s Jump to the Network Mailbox line.
~ Enter the number for the network mailbox.
§Save§ Press the display key.
a Press and hold the end call key (idle status).
Quick dial is activated.
Please note
You can only assign quick dial to one answering machine.
You can also call the network mailboxes for the handset's receive connections
directly via the message key (
¢ page 135).