Operation Manual

Gigaset C610/610A IP / USA en / A31008-M2312-R301-1-6043 / configuration_10pg.fm / 4/7/11
Version 5, 23.09.2008
10
Configuring the VoIP connection
Provided that your phone is set for auto-configuration (default setting), you will see the following
display. Otherwise, for more information, see .
A list of all possible IP connections is shown in the display
(IP 1 to IP 6). VoIP connections that are already configured
are marked with
³.
> If necessary, press down on the control key s to select
a connection.
> Press the §OK§ display key to continue.
If you have received a regis-
tration name/password
and, if applicable, a user
name:
> Press the key below §No§
on the display screen.
> For more information,
see .
If you have received an
auto-configuration code:
> Press the key below §Yes§
on the display screen.
> For more information,
see .
If your phone cannot establish a connection to the Internet, the message Internet connection not
available is displayed.
> Press the left display key §Info§ to display information about the possible causes of errors.
> Press the right display key §OK§ to end the VoIP wizard and start the connection wizard
(step ).
Select IP Account
IP 1
´
IP 2
´
IP 3
´
IP 4
´
IP 5
´
V
Back OK
10
10
IP Wizard
?
Do you have a
code for auto
configuration?
No Yes
9
12