Specifications

51
Base settings
Gigaset C590/C595 / USA-CAN engl / A31008-M2101-R301-1-3S19 / registr_sett.fm / 19.04.2010
Version 4, 16.09.2005
Base settings
The base settings are performed using a reg-
istered Gigaset C59H handset.
Changing the base ringtones
u Volume:
You can choose between five levels of
volumes (1–5; e.g. level 3 = Š) and
the "crescendo" ringtone (6; where the
volume increases with each ring =
‡).
u Ringtones:
You can select a ringtone from a list of
pre-loaded ringtones.
In idle state:
v
¢ Audio Settings
¢ Ringtones (Base)
¤ Change multiple line input:
r Set volume.
s Scroll to the next line.
r Set melody.
§Save§ Press the display key to save the
setting.
Activating/deactivating
music on hold
v ¢ Audio Settings
¢ Music on Hold
Press §Change§ to activate or deactivate the
music on hold (³ = on).
Protecting against
unauthorized access
Protect the system settings of the base with
a PIN known only to yourself. You must enter
the system PIN when, for example, you regis-
ter/deregister a handset to/from the base or
when you restore the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (the default is: 0000) to a 4-digit PIN
known only by you.
Gigaset C595 only: Setting a system PIN facil-
itates remote operation of the answering
machine
¢ page 39.
v ¢
Ï
¢ System ¢ System PIN
~ Enter the current system PIN
and press
§OK§.
~ Enter your new system PIN and
press
§OK§.
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base to the original code 0000:
u Disconnect the power cord from the
base.
u Hold down the registration/paging but-
ton on the base while reconnecting the
power cable to the base.
u Keep the key pressed for at least 5
seconds.
The base has now been reset and the system
PIN 0000 set.
Restoring the base to the
factory settings
When the settings are restored:
u Date and time are retained
u Handsets are still registered.
u Eco Mode is switched on.
u The system PIN is not reset.
v ¢
Ï
¢ System ¢ Base Reset
~ At the prompt, enter the system
PIN and press
§OK§.
§Yes§ Press the display key.
•
•
Please note
All handsets are deregistered and must
be re-registered. All settings are restored
to the factory settings.
•