User guide

14
A400/A400A / GBR / A31008-M2201-L101-2-7619 / main.fm / 27.04.2011
Specifications
Recommended batteries
Only use rechargeable batteries as described below.
Technology: Nickel-metal-hydride (NiMH)
Size: AAA (Micro, HR03)
Voltage: 1.2 V
Capacity: 400–800 mAh
The device is supplied with two approved batteries.
Base power consumption
General specifications
Questions and answers
If you have any queries about the use of your tele-
phone, visit our website at
www.gigaset.com/service
for assistance 24/7. The table below contains a list of
common pr
oblems and possible solutions.
In standby mode
- Charged handset in base
- Handset not in base
approx. 0.7 W
< 0.4 W
During a call approx. 0.5 W
DECT standard Is supported
GAP standard Is supported
(The Gigaset handset is only fully
func
tional on
Gigaset bases)
Range Up to 300 m outdoors
Up to 50 m indoors
Base power supply 230 V ~/50 Hz
Environmental condi-
tions in operation
+5°C to +45°C, 20% to 75% relative
hu
m
idity
Standby time 220 hours
Talktime 20 hours
Operating time for 1.5
hours
of calls per day
- Without Eco Mode+
- With Eco Mode+
135 hours
90 hours
Charging time in
cha
r
ger 5.5 hours
Problem Cause Solution
Nothing
appears in the
display.
The handset is not
switched on.
The batteries are
fla
t
.
Press the end call key
a for approx.
5 seconds or pla
ce the
handset in the base.
Charge or replace the
batterie
s.
No wireless
connec
tion to
th
e base, Base
flashes in the
display.
The handset is out-
side the range of
th
e base.
The handset is not
re
g
istered.
The base is not
switched on.
Move the handset
clos
er to
the base.
Register the handset
¢ page 11.
Check the mains con-
nector on the base
¢ page 3.
You cannot
hear a r
i
nger
melody/dial-
ling tone from
th
e fi
xed line
network.
The phone cord
supp
lied has not
been used or has
been replaced by a
new cord with the
wrong pin connec-
tions.
Please always use the
phon
e cord supplied or
ensure that the pin
connections are cor-
rect when purchasing
fr
om a
retailer: 3-4
assignment of tele-
phone leads/EURO
C
T
R37.
Error tone
soun
ds after
system PIN
pr
ompt.
PIN forgotten.
You have entered
the
wr
ong system
PIN.
Reset the system PIN to
the default setting
0000 ¢ page 12.
All handsets are de-
r
e
gistered. All settings
are reset. All lists are
deleted.
The connec-
tion always
ter
m
inates
after approx.
30 seconds.
Repeater acti-
vated/deactivated
¢ page 13.
Deactivate and
reac
tivate the handset
¢ page 6.