Operation Manual

ManualsBrandsSiemens ManualsConsumer electronicsGigaset A400

A400/A400A / GBR / A31008-M2201-L101-3-7619 / Version 4, / starting.fm / 19.06.2013

First steps

Checking the package contents

u One Gigaset A400/A400A base

u One power adapter

u One Gigaset handset

u One phone cord

u Two batteries

u One battery cover

u One user guide

If you have purchased a model with

multiple handsets, the package should contain two bat-

teries, a battery cover and a charging cradle with pow

er adapter for each additional handset.

Setting up the base and charger (if included)

The base and charging cradle are designed for use in dry rooms in a temperature range of +5°C

to +45°C.

¤ S

et up the base at a central point in the building on a flat, non-slip surface.

The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of

diff

erent varnishes and polishes used on today's furnishings, the occurrence of marks on the

surfaces cannot be completely ruled out.

You can also mount the base and charging cradl

e on the wall (see packaging).

Please note:

u Never expose the telephone to the influence of hea

t sources, direct sunlight or other elec-

trical devices.

u Protect your Gigaset from moisture, dust, corrosive liquids and fumes.

Connecting the base

¤ First, connect the telephone jack 2 and insert

the cables into the cable ducts.

¤ Then connect the power adapter 1.



Please note:

u The power adapter must alwa

ys be connected,

as the phone will not operate without a mains

connection.

u Use only the power adapter and phone cord

supp

lied. Pin connections on telephone cables

can vary.

u The answering machine is ready for use

prox. 15 seconds after the base has been

connected or reset.

Please note

ay attention to the range of the base.

This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. The

range is reduced when Eco Mode is activated (¢ page 20).