User guide

5
Gigaset A180/A180 DUO / CHN / A31008-M2046-Y101-1-7619 / starting.fm / 08.01.2010
Setting up the handset for use
¤ Remove the protective film!
Inserting the batteries and closing the battery
cover
Inserting the batteries
Placing the handset in the base and charging
the batteries
Before you can use the handset, you must first charge
the batteries.
¤ Place the handset with the display facing up
in the base station.
¤ If you have a Gigaset A180 DUO place the second
handset with the display facing up in the charg-
ing cradle.
The idle screen is displayed. The
handset name and the internal
handset number are shown. The
handset is already registered to
the base.
In the case of Gigaset A180 DUO both delivered
handsets are registered automatically.
If you want to register further handsets, you have to
register each individual handset manually
(¢ page 12).
Handsets are assigned the lowest available internal
number (1-4). If four handsets are registered you will
have to deregister one handset before you can regis
-
ter another.
The display is protected by a
plastic film.
Warning
Use only the rechargeable batteries recom-
mended by Gigaset Communications GmbH
(
¢ page 16). Never use a conventional (non-
rechargeable) battery or other battery types as
this could result in significant health risks and per
-
sonal injury. For example, the batteries could
explode. The phone could also malfunction or be
damaged as a result of using batteries that are not
of the recommended type.
Opening the battery cover
If you need to open the battery cover, for instance to
replace the batteries:
¤ Insert the batter-
ies the right way
round.
T
he polarity is indicated in/on
the battery compartment.
Closing the battery cover
¤ Slide the battery cover from bottom up
onto the casing
until it clicks
into place.
¤ Press the ribbing at the top of the battery cover
and slide it
downward.
Ò=
Gigaset 1