User guide

15
Gigaset A180/A180 DUO / CHN / A31008-M2046-Y101-1-7619 / main.fm / 08.01.2010
Connecting to PABX
Your phone is preset at the factory for operation on
the main connection. For operation on a PABX, you
may have to change the following values. Please refer
to the user guide for your PABX.
¤ To change the handset settings use the menu.
f ¢ ADVANCED SET
Prefix setup
You can set a prefix which is automatically added to a
phone number with at least 5 digits. This prefix can be
used to dial into the outside line when operating the
device on a PABX.
Precondition: The number must be dialled in idle
mode, i.e. first
~
then ª.
f¢ADVANCED SET ¢|
¢AUTO PREFIX¢|
¢p(select ON or OFF) ¢|
~
(enter prefix, max. 5 digits) ¢|
¤ To enter a pause in the prefix press and hold Z.
The pause may be needed to obtain the outside line
before proceeding dialling. Pause duration is one sec
-
ond by default.
Example: Prefix is ON and set to 65
Setting flash time
Flash time is the time used to identify a signal of the
flash key (
S). On your device it is set to 100 ms and
may be different on your PABX.
You can set the flash time to 100 (SHORT), 300
(
MEDIUM) or 600 (LONG) ms. (Default: SHORT)
¢f¢ADVANCED SET ¢|
¢FLASH TIME ¢|
¢p(select SHORT, MEDIUM or LONG) ¢|
Changing the dialling mode
There are two dialling modes: TONE (Touch tone dial-
ling - DTMF) and PULSE (dial pulsing - DP)
(Default: TONE)
It may be different on your PABX and can be changed:
f¢ADVANCED SET ¢|
¢DIAL MODE ¢|
¢p(select PULSE or TONE) ¢|
Appendix
Writing and editing text
The following rules apply when writing text:
◆ Control the cursor with p.
◆ Characters are inserted on the left of the cursor.
◆ The first letter of the name of phone book entries
is automatically capitalised.
Press the relevant key several times to enter letters/
characters.
Standard characters on the handset
1)Space
2)without effect when entering names
Questions and answers
If you have any questions about using your phone,
visit us at
www.gigaset.com/customercare at any time.
Authorisation
This device is intended for connection to analogue
networks outside the EEA (with the exception of Swit
-
zerland) depending on national type approval.
Country-specific requirements have been taken into
consideration.
We, Gigaset Communications GmbH, declare that this
device meets the essential requirements and other
relevant regulations laid down in Directive 1999/5/
CE.
A copy of the 1999/5/EC Declaration of Conformity is
available at this Internet address:
http://www.gigaset.com/docs.
AUTO PREFIX
Set a prefix for dialling outside line.
FLASH TIME
Change the flash time.
DIAL MODE
Change the dial mode.
You dial Really dialled number
1234 1234
12345 65P12345
#12345 65P#12345
1x 2x 3x 4x 5x 6x

1 _ < >
2
A B C 2 A B
3
D E F 3 D E
4
G H I 4 G H
5
J K L 5 J K
L
M N O 6 M N
M
P Q R S 7 P
N
T U V 8 ? T
O
W X Y Z 9 W
Q
0 -- / \ # +
*
* * * * * *
#
# # # # # #
1) 1)
2
)
2
)