Operation Manual

85
Appendix
Gigaset 4010 Micro, GBR, A31008-G4010-B122-1-
ANHA.FM
25.3.02
Appendix
Maintenance
Simply wipe the base station and handset with a
damp cloth
or an
antistatic wipe.
Never
use a dry cloth as this can cause static dis-
charge.
Contact with liquid
If the handset should come into contact with liquid,
on no account switch the device on.
Remove all batteries immediately.
Allow the liquid to drip out of the device, and then dab all parts of the
device dry.
Keep the handset with the batteries removed in a warm, dray place for
at least 72 hours. In many cases, you will then be able to use it again.
Questions and answers
If any questions occur to you while you are using your device, we are
available 24 hours a day at
www.my-siemens.com/customercare
.
You will find the most frequently asked questions and answers below.
Question Possible cause Possible solution
No display Handset not activated Hold down end call key
!
for 1 second
Battery empty Charge or replace the
battery (page 11)
No reaction to key-
stroke
Keypad protection acti-
vated
Hold down
the
key
for 1 second
No radio connection to
the base station – E.g.
base station 1
is flash-
ing
Handset outside the
base station range
Move closer to the base
station
Handset not registered Register the handset
(page 59)
Base station not activat-
ed
Check the connector at
base station (page 9)
Handset does not ring Ringer off Activate the ringer
Hold down the
key
External telephone
numbers can
not
be di-
alled
Number barring (mail-
box service) is activated
Deactivate number bar-
ring
!