Operation Manual

82
Press keys:
Connecting the base station to a PABX
Gigaset 4010 Micro, GBR, A31008-G4010-B122-1-7619
ANLAGEN.FM
25.3.02
Connecting the base station to
a PABX
Some telephone systems do not support the CLIP
function and therefore also do not allow SMS messag-
es to be sent or received.
See the operating instructions for the telephone
system
.
Dialling mode and flash time
Step 1: Changing the dialling mode
You only need to change the dialling mode if your PABX
does not operate with preset tone dialling
(
DTMF
d
ual
-
t
one
m
ulti
f
requency).
Please refer to the operating
instructions for your PABX
.
Options:
– Tone dialling (DTMF)
–
D
ial
p
ulsing (DP)
Open the menu.
Base Settings
Select the menu item and confirm.
Add. Features
Select the menu item and confirm.
Dialling Mode
Select the menu item and confirm.
Select dialling mode you want and confirm.
Step 2: Setting the flash time
Prerequisite:
your PABX requires a flash time other
than the preset flash time (to set up a connection to the
telephone network.
Please refer to the operating instructions for your
PABX
.
Open the menu.
Base Settings
Select the menu item and confirm.
Add. Features
Select the menu item and confirm.
TBR
Select the menu item and confirm.
Select the flash time and confirm.
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms,
600 ms.

The appropriate setting is marked with a
'
.