Operation Manual

Preparing the telephone

Gigaset 4010 Micro, GBR, A31008-G4010-B122-1-7619

VORBEREI.FM

25.3.02

Note:

Your Gigaset is now ready for operation. Your answering machine is

set with a standard announcement. Please set date and time (see

page 13) so that the time of incoming calls can be noted correctly.

Attaching the belt clip

Push the belt clip onto the back of the handset until the side “protru-

sions” click into place.

Activating/deactivating the handset

To activate/deactivate, hold

down

the end call key – you will hear the

confirmation

beep *.

Activating/deactivating keypad protection

You should disable the handset keypad if you are going to carry the

handset in your pocket or bag. This prevents numbers being dialled by

accident.

If there is an incoming call, the key lock is automatically deactivated

and re-activated after the call has ended.

Accepting a call: press the talk key

To activate/deactivate, hold

down

key – you will hear the confirmation

beep



Once the initial charging operation is completed you can replace

your handset in the base station after each call.



The handset is activated as soon as you insert the batteries and

place the handset in the base station.

* Confirmation beep = rising tone sequence,

Error beep = descending tone sequence.