Specifications

87
Configuring Advanced Settings
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008
Schablone 2005_07_27
Sending power
ì Select the required sending power for your device.
It is recommended that you select a sending power with a range to suit the spatial
environment of your local network. A much greater range makes it easier to eaves-
drop on your wireless data transfer.
ì Click OK to apply the settings.
Starting WPS registration and configuring WPS
Wi-Fi Protected Setup (WPS) makes it easier to establish a wireless network. Devices
equipped with WPS can synchronise the SSID and the WPA key (pre-shared key).
The most simple method to establish a secure wireless connection is press the registra-
tion (Scan) button or click once in the user interface of the Giga762SX WLAN dsl and do
the same with the client. For further information, see "WPS" on page 15.
The configuration program of the Giga762SX WLAN dsl provides beside the Push But-
ton method for WPS registration for more security the registrations mode via PIN.
ì In the Advanced Settings menu select: Wireless Network – WPS Registration
ì Choose the desired Registration Mode:
–Push Button
Click OK to start the WPS registration.
This function corresponds to pressing the Scan button on the
device’s back panel, if available.
Once WPS registration is activated, the device searches for a
WPS client within range. Any WPS client within range that acti-
vates the WPS function during the two-minute interval